8/13/25, 2:47
PM
LAST RCO FINAL EXAM QUESTIONS AND
ANSWERS WITH COMPLETE SOLUTIONS
VERIFIED LATEST UPDATE GRADED A++
2025/2026
Terms in this set (102)
If the tilt feature is An emergency brake application
allowed to time out,
what brake
application will result?
If the secondary Both RCO's must perform the recovery procedure
operator places the RCT
into The Secondary RCO must
emergency, which recover the emergency
RCO(s) must recover the application first
emergency?
What are all Shoving movements
movements in remote
control operations
considered?
List the steps to recover 1. Place speed selector to stop
an emergency brake 2. Move the independent brake override lever to
application emergency
3. Press the vigilance toggle
4. Place independent brake override lever to release
1/
21
,8/13/25, 2:47
PM
When the RCO uses 4 mph until the crossing is occupied
cameras to protect a
road crossing what
speed must movement
enter the crossing?
List the steps for 1. Move the speed selector to stop
recovering a full service 2. Toggle the automatic brake selector to full
brake 3. Press the vigilance toggle
application 4. Move the automatic brake selector to release
What is the first RCT The tilt feature
feature the operator
tests when
initially setting up a
locomotive for remote
operation?
2/
21
, 8/13/25, 2:47
PM
What condition would Tilting the RCT by more than 45 degrees
cause a steady tone
alarm?
Which RCT component The independent brake override lever
will send an
emergency stop
command to the RCL?
How would a RCO Press a vigilance toggle
respond when a
beeping or
pulsing alarm sounds on
the RCT?
What is the preferred Ramping the
method of slowing or speed selector
stopping or
your movement? Using the coast feature
If the primary RCT Re-link as a single RCO
would fail, how would
the
secondary RCO be
able to continue
working?
After making verbal Press the pitch button
confirmation, how does
the
primary RCO initiate a
pitch?
How many seconds 10 seconds
3/
21
PM
LAST RCO FINAL EXAM QUESTIONS AND
ANSWERS WITH COMPLETE SOLUTIONS
VERIFIED LATEST UPDATE GRADED A++
2025/2026
Terms in this set (102)
If the tilt feature is An emergency brake application
allowed to time out,
what brake
application will result?
If the secondary Both RCO's must perform the recovery procedure
operator places the RCT
into The Secondary RCO must
emergency, which recover the emergency
RCO(s) must recover the application first
emergency?
What are all Shoving movements
movements in remote
control operations
considered?
List the steps to recover 1. Place speed selector to stop
an emergency brake 2. Move the independent brake override lever to
application emergency
3. Press the vigilance toggle
4. Place independent brake override lever to release
1/
21
,8/13/25, 2:47
PM
When the RCO uses 4 mph until the crossing is occupied
cameras to protect a
road crossing what
speed must movement
enter the crossing?
List the steps for 1. Move the speed selector to stop
recovering a full service 2. Toggle the automatic brake selector to full
brake 3. Press the vigilance toggle
application 4. Move the automatic brake selector to release
What is the first RCT The tilt feature
feature the operator
tests when
initially setting up a
locomotive for remote
operation?
2/
21
, 8/13/25, 2:47
PM
What condition would Tilting the RCT by more than 45 degrees
cause a steady tone
alarm?
Which RCT component The independent brake override lever
will send an
emergency stop
command to the RCL?
How would a RCO Press a vigilance toggle
respond when a
beeping or
pulsing alarm sounds on
the RCT?
What is the preferred Ramping the
method of slowing or speed selector
stopping or
your movement? Using the coast feature
If the primary RCT Re-link as a single RCO
would fail, how would
the
secondary RCO be
able to continue
working?
After making verbal Press the pitch button
confirmation, how does
the
primary RCO initiate a
pitch?
How many seconds 10 seconds
3/
21
