CEM 326 Final Exam Questions and Answers Fully Solved Latest Version 2025-2026
How many dicks does Wyatt suck - Answers DOZENS
After explaining how to address a safety hazard, a superintendent asks his foreman to repeat
the steps back to him to make sure he understands his instructions. This is an example of -
Answers Actively Listening
Being safe in everything you do on the job site, also called 'Walking the Talk' is an example of -
Answers Leading by Example
If an apprentice identifies a job hazard and helps to come up with a solution, her foreman
should use __ to reward her - Answers Recognizing Team Members for Job well Done
Key components for stairway safety - Answers Treads, Rails, Landings and Platforms
When portable ladders are used for access to an upper landing surface, how many feet above
the upper landing must the side rails extend? - Answers 3 Feet
You can use metal ladder around power lines or exposed energized electrical equipment. -
Answers False
Handrails must be able to withstand, without failure, how many pounds of weight applied within
2 inches of the top edge in any downward or outward direction? - Answers 200 pounds
Stairways that have four or more risers MUST have a stair rail.a. - Answers True
A non-self-supporting ladder should be set up at ___ (horizontal distance/working length of
ladder). - Answers 1:4 angle
Never enter a trench 5' or greater in depth unless a protective system is in place. - Answers True
Trenches less than 5' deep still require the competent person's "OK"•If a trench box or shoring is
used, never leave its protection while in the trench - Answers True
What is the minimum distance that excavated materials, tools, and other supplies be kept back
from the excavation's edge? - Answers 2 Feet
CheckAt what depth must a ladder, ramp, steps, or runway be present for quick worker exit -
Answers 4 Feet
What is the greatest hazard facing a worker while working in a trench: - Answers Cave ins
Unless made in entirely stable rock, at what depth is a protective system required for a trench: -
Answers Any depth if the competent person says so AND 5 feet deep and greater
Masonry Construction - Answers CFR 1926.706
How many dicks does Wyatt suck - Answers DOZENS
After explaining how to address a safety hazard, a superintendent asks his foreman to repeat
the steps back to him to make sure he understands his instructions. This is an example of -
Answers Actively Listening
Being safe in everything you do on the job site, also called 'Walking the Talk' is an example of -
Answers Leading by Example
If an apprentice identifies a job hazard and helps to come up with a solution, her foreman
should use __ to reward her - Answers Recognizing Team Members for Job well Done
Key components for stairway safety - Answers Treads, Rails, Landings and Platforms
When portable ladders are used for access to an upper landing surface, how many feet above
the upper landing must the side rails extend? - Answers 3 Feet
You can use metal ladder around power lines or exposed energized electrical equipment. -
Answers False
Handrails must be able to withstand, without failure, how many pounds of weight applied within
2 inches of the top edge in any downward or outward direction? - Answers 200 pounds
Stairways that have four or more risers MUST have a stair rail.a. - Answers True
A non-self-supporting ladder should be set up at ___ (horizontal distance/working length of
ladder). - Answers 1:4 angle
Never enter a trench 5' or greater in depth unless a protective system is in place. - Answers True
Trenches less than 5' deep still require the competent person's "OK"•If a trench box or shoring is
used, never leave its protection while in the trench - Answers True
What is the minimum distance that excavated materials, tools, and other supplies be kept back
from the excavation's edge? - Answers 2 Feet
CheckAt what depth must a ladder, ramp, steps, or runway be present for quick worker exit -
Answers 4 Feet
What is the greatest hazard facing a worker while working in a trench: - Answers Cave ins
Unless made in entirely stable rock, at what depth is a protective system required for a trench: -
Answers Any depth if the competent person says so AND 5 feet deep and greater
Masonry Construction - Answers CFR 1926.706
