1|Page
ICC Vapor Recovery 2 Actual Exam 2025/ 2026
Complete Questions And Correct Detailed Answers
(Verified Answers) |Already Graded A+||Latest Exam
Version!!!
After backfilling the vapor return and vent lines, the
maximum pressure drop through the system shall not
exceed ________at 60 cubic feet per hour as determined
by TP-201.4, Dynamic Backpressure.
a. 0.75 inches WC
b. 0.5 inches WC
c. 0.32 inches WC
d. 0.55 inches WC - Answer-c. 0.5 inches WC
CARB's most recent vapor recovery regulations are known
as:
a. EVR (enhanced vapor recovery)
b. CVR (California vapor recovery)
c. PVR (protective vapor recovery)
,2|Page
d. ORVR (onboard refueling vapor recovery) - Answer-a.
EVR (enhanced vapor recovery)
A valve installed in a motor-vehicle fueling hose designed
to separate with little or no product
a. breakaway
b. hose clamp
c. sheer valve
d. flow limiter - Answer-a. breakaway
A Gilbarco Vapor VAC/OPW Vapor Saver system is
consdered to have a vapor recovery equipment defect
(VRED) if the vapor escape guard on an OPW 12 VW
nozzle is missing or damaged on at least ____ % of the
circumference of the device.
a. 25
b. 50
c. 75
d. 100 - Answer-c. 75
, 3|Page
The two point Phase I vapor recovery system requires that
a separate vapor recovery riser pipe be installed in the
tank and be equipped with a:
a. drop tube
b. locking block valve
c. pressure/vacuum vent
d. vapor recovery adaptor - Answer-d. vapor recovery
adaptor....
When removing liquid from a sump or spill bucket and the
liquid contains fuel, it must be:
a. managed as hazardous waste
b. pumped into a bucket to evaporate
c. scooped or balled onto the concrete pad
d. put it in a sealed container and put into a dump -
Answer-a. managed as hazardous waste
One of the approved methods of overfill prevention is to
have an overfill device that will automatically shut off the
ICC Vapor Recovery 2 Actual Exam 2025/ 2026
Complete Questions And Correct Detailed Answers
(Verified Answers) |Already Graded A+||Latest Exam
Version!!!
After backfilling the vapor return and vent lines, the
maximum pressure drop through the system shall not
exceed ________at 60 cubic feet per hour as determined
by TP-201.4, Dynamic Backpressure.
a. 0.75 inches WC
b. 0.5 inches WC
c. 0.32 inches WC
d. 0.55 inches WC - Answer-c. 0.5 inches WC
CARB's most recent vapor recovery regulations are known
as:
a. EVR (enhanced vapor recovery)
b. CVR (California vapor recovery)
c. PVR (protective vapor recovery)
,2|Page
d. ORVR (onboard refueling vapor recovery) - Answer-a.
EVR (enhanced vapor recovery)
A valve installed in a motor-vehicle fueling hose designed
to separate with little or no product
a. breakaway
b. hose clamp
c. sheer valve
d. flow limiter - Answer-a. breakaway
A Gilbarco Vapor VAC/OPW Vapor Saver system is
consdered to have a vapor recovery equipment defect
(VRED) if the vapor escape guard on an OPW 12 VW
nozzle is missing or damaged on at least ____ % of the
circumference of the device.
a. 25
b. 50
c. 75
d. 100 - Answer-c. 75
, 3|Page
The two point Phase I vapor recovery system requires that
a separate vapor recovery riser pipe be installed in the
tank and be equipped with a:
a. drop tube
b. locking block valve
c. pressure/vacuum vent
d. vapor recovery adaptor - Answer-d. vapor recovery
adaptor....
When removing liquid from a sump or spill bucket and the
liquid contains fuel, it must be:
a. managed as hazardous waste
b. pumped into a bucket to evaporate
c. scooped or balled onto the concrete pad
d. put it in a sealed container and put into a dump -
Answer-a. managed as hazardous waste
One of the approved methods of overfill prevention is to
have an overfill device that will automatically shut off the
