F CARD EXAMS SCRIPT 2025/2026 QUESTIONS AND
ANSWERS RATED A+
✔✔A ____ is a single station alarm capable of being interconnected to one or more
additional alarms so that the actuation of one caused the appropriate alarm signal to
operate in all interconnected alarms. - ✔✔Multiple Station Alarm
✔✔_____ is the maximum number of discrete elements of FA systems permitted to be
used in a particular configuration. - ✔✔Loading capacity
✔✔The location of the equipment needed to relay signals between supervising stations,
subsidiary stations, and protected premises is a ____ - ✔✔Repeated Station
✔✔Each coded ratio box shall automatically transmit a test message at least once in
each ____ hour period. - ✔✔24hrs
✔✔A licensed company that is providing service relating to the installation or
maintenance of a fire system shall give ____ says written notice to the owner, occupant,
and AHJ before the licenses company discontinued service to the owner or occupant as
appropriate. - ✔✔30 days
✔✔A distributor or installer of a protective signaling system must present the state fire
marshal with evidence of the ability to respond for any needed repair and restoration
within ____ hours of being notified by the fire department. - ✔✔24hrs
✔✔Smoke detectors shall not be located directly in the air stream of supply registers?
T/F - ✔✔True
✔✔A coded alarm signal shall consist of not less than ____ complete rounds of the
number transmitted. - ✔✔3
✔✔Actuation Of alarm notification appliances or emergency voice communication and
annunciation at the protected premises shall occur within ____ seconds after the
activation of an initiating device. - ✔✔10
✔✔A ____ is any conductor, optic fiber, radio carrier, or other means for transmitting FA
system information between 2 or more locations. - ✔✔Path
✔✔A ____ is a means of conveying a number of channels over a single path by
modulating each channel on a different carrier frequency and demodulation at the
receiving point to restore the signals to their original form. - ✔✔Carrier system
ANSWERS RATED A+
✔✔A ____ is a single station alarm capable of being interconnected to one or more
additional alarms so that the actuation of one caused the appropriate alarm signal to
operate in all interconnected alarms. - ✔✔Multiple Station Alarm
✔✔_____ is the maximum number of discrete elements of FA systems permitted to be
used in a particular configuration. - ✔✔Loading capacity
✔✔The location of the equipment needed to relay signals between supervising stations,
subsidiary stations, and protected premises is a ____ - ✔✔Repeated Station
✔✔Each coded ratio box shall automatically transmit a test message at least once in
each ____ hour period. - ✔✔24hrs
✔✔A licensed company that is providing service relating to the installation or
maintenance of a fire system shall give ____ says written notice to the owner, occupant,
and AHJ before the licenses company discontinued service to the owner or occupant as
appropriate. - ✔✔30 days
✔✔A distributor or installer of a protective signaling system must present the state fire
marshal with evidence of the ability to respond for any needed repair and restoration
within ____ hours of being notified by the fire department. - ✔✔24hrs
✔✔Smoke detectors shall not be located directly in the air stream of supply registers?
T/F - ✔✔True
✔✔A coded alarm signal shall consist of not less than ____ complete rounds of the
number transmitted. - ✔✔3
✔✔Actuation Of alarm notification appliances or emergency voice communication and
annunciation at the protected premises shall occur within ____ seconds after the
activation of an initiating device. - ✔✔10
✔✔A ____ is any conductor, optic fiber, radio carrier, or other means for transmitting FA
system information between 2 or more locations. - ✔✔Path
✔✔A ____ is a means of conveying a number of channels over a single path by
modulating each channel on a different carrier frequency and demodulation at the
receiving point to restore the signals to their original form. - ✔✔Carrier system
