CWB Level 1 Functions of the Inspector 2025 Complete Questions And Verified Answers/ Complete Solutions With Rationales |Get It 100% Accurate!! Already graded A+

CWB Level 1 Functions of the
Inspector 2025 Complete Questions
And Verified Answers/ Complete
Solutions With Rationales |Get It
100% Accurate!! Already graded A+

Save




Terms in this set (114)

,1. Which is not a b) Blasting with shot or dull sand.
recommended
method for
surface cleaning
of a part for
liquid penetrant
examination?
a) Cleaning with
organic solvents.
b) Blasting with
shot or dull sand.
c) Cleaning with
de-greasers.
d) Use of de-
scaling solutions.
e) Ultrasonic
cleaning
methods.

,2. Which of the d) Cracking.
following weld
defects is most
likely to be
missed by
radiography in a
weld:
a) Undercutting.
b) Porosity.
c) Slag inclusions.
d) Cracking.
e) Burn through .

, 3. In the choices c) Ability of the material to withstand
given below, repeated fluctuating loads.
metallographic
tests would be
the least
informative with
regard to the:
a) Presence of
the non-metallic
inclusions.
b) Grain structure
in the weld and
fusion zone.
c) Ability of the
material to
withstand
repeated
fluctuating loads.
d) Extent and
structure of the
heat affected
zone.
e) Number of
weld passes.