Definitive Handbook for the SDS1000 Digital Oscilloscope Series

User Manual




SDS1000CML+/SDS1000DL+
Digital Oscilloscope

,Brief Introduction
Characteristic:
● Rated voltage/frequency: 100-240Vrms,50/60Hz
100-120Vrms,400Hz
● Rated input power: 30W MAX
● The volume of the oscilloscope is cabinet and it is portable
● 7” Color TFT LCD display
● 2 channels, Bandwidth: 40MHz-150 MHz
● Single real-time sampling rate is: 1Gsa/s; Equivalent
sampling rate is 50GSa/s.
● Trigger types: Edge, Pulse, Video, Slope and Alternative
● Unique Digital Filter function and Waveform recorder
function
● Auto measure thirty two parameters and support all
measurement function.
●Two groups’ reference waveforms and twenty groups’ capture
waveforms and twenty groups’ setups internal save/recall function and
USB flash drive save/recall function.
● Cursor types: Manual mode, Track mode and Auto mode.
● Channel waveform and its FFT waveform display on split
screen.
● Waveform Intensity and Grid Brightness can be adjusted.
● Menu display in the form of pop-up that in order to
convenience users to use it.
● Rich Screen display styles: Classical, Modern, Tradition,
Succinct.
● Multiple Language User Interface.
● Support Multilingual online help system
●Standard interface: USB Host, USB Device, LAN port




I

, Model:

Model Analogy Bandwidth Sampling Rate

SDS1152CML 150MHz 1GSa/s
SDS1102CML 100MHz 1GSa/s
SDS1072CML 70MHz 1GSa/s
SDS1062CML 60MHz 1GSa/s
SDS1000CML+/SDS1000DL+ User Manual
SDS1152CML+ 150MHz 1GSa/s
SDS1102CML+ 100MHz 1GSa/s
SDS1072CML+ 70MHz 1GSa/s
SDS1202DL 200MHz 500MSa/s
SDS1152DL 150MHz 500MSa/s
SDS1102DL 100MHz 500MSa/s
SDS1062DL 60MHz 500MSa/s
SDS1052DL 50MHz 500MSa/s
SDS1022DL 20MHz 500MSa/s
SDS1202DL+ 200MHz 500MSa/s
SDS1102DL+ 100MHz 500MSa/s
SDS1052DL+ 50MHz 500MSa/s
SDS1022DL+ 20MHz 500MSa/s
SDS1202CNL 200MHz 1GSa/s
SDS1102CNL 100MHz 1GSa/s
SDS1072CNL 70MHz 1GSa/s
SDS1062CNL 60MHz 1GSa/s
SDS1202CNL+ 200MHz 1GSa/s
SDS1102CNL+ 100MHz 1GSa/s
SDS1072CNL+ 70MHz 1GSa/s
SDS1202A 200MHz 500MSa/s
SDS1152A 150MHz 1GSa/s
SDS1102A 100MHz 1GSa/s
SDS1072A 70MHz 1GSa/s
SDS1062A 60MHz 1GSa/s
SDS1052A 50MHz 500MSa/s
SDS1022A 20MHz 500MSa/s
SDS1202B 200MHz 500MSa/s
SDS1152B 150MHz 1GSa/s
SDS1102B 100MHz 1GSa/s
SDS1072B 70MHz 1GSa/s
SDS1062B 60MHz 1GSa/s
SDS1052B 50MHz 500MSa/s
SDS1022B 20MHz 500MSa/s

II

, SDS1152E+ 150MHz 1GSa/s
SDS1122E+ 120MHz 1GSa/s
SDS1102E+ 100MHz 1GSa/s
SDS1072E+ 70MHz 1GSa/s
SDS1202F+ 200MHz 500MSa/s
SDS1152F+ 150MHz 500MSa/s
SDS1102F+ 100MHz 500MSa/s
SDS1052F+ 50MHz 500MSa/s




Standard Accessories:

● 1:1/10:1 probe (2 PCS)
● Power Cable that fits the standard of destination country ●
Qualified Certification.
● Quick Start
● USB Cable



General Safety Summary

Carefully read the following safety precautions to avoid person injury and prevent
damage to the instrument and any products connected to it. To avoid potential
hazards, please use the instrument as specified.

Only qualified technician should perform service procedures

To Avoid Fire or Personal Injure

Use Proper Power Line
Use only the special power line of the instrument which approved by local state.

Ground the Instrument
The instrument grounds through the protective terra conductor of the power line.
To avoid electric shock, the ground conductor must be connected to the earth.
Make sure the instrument is grounded correctly before connect its input or output
terminals.

Connect the Signal Wire Correctly


III