BCTC Industrial Maintenance Technology AMTEC (NOCTI
Mechatronic) Review
If you inhale phenolic fumes what would happen A Safety Data Sheet (SDS) provides information
to you? - -Trouble breathing about first aid measures, stability and reactivity,
and _____? - -Handling and Storage
A _________ fire extinguisher should be used on
an electrical fire. - -Class C Which of the following is not true of a title block? -
-Format is the same from company to
company.
What does OSHA stand for? - -
Occupational Safety & Health Administration
A NFPA 70E is a regulation that provides
guidelines and details for ___________? - -
Electrical safety
This type of drawing represents a three-
dimensional object using several two-
dimensional views of the object. - -
Orthographic GFCI devices are used for what purpose? -
-To prevent a person from being
electrocuted.
What are linear dimensions usually expressed
in? - -Decimal or Fractional Units
A person with serious electrical injury should be
moved only when _______. - -They are in
immediate danger
What does a filled triangle represent in a fluid
power diagram? - -Hydraulic Flow
What must be provided by chemical
manufacturers, distributors, and importers to
What can happen if bolts and nuts are not anyone who will work with these potentially
properly torqued? - -They wear out quickly dangerous materials? - -Safety Data Sheet
and can cause failure. (SDS).
What safety practice is used to prevent You come across a fellow employee who is being
equipment from being energized? - - electrocuted by becoming attached to a live
Lockout/Tagout electrical circuit, what is the first thing you should
do? - -Shut off the circuit.
, BCTC Industrial Maintenance Technology AMTEC (NOCTI
Mechatronic) Review
power source when an overload is sensed. -
What would slippery floors and cluttered -Electric motor
walkways be considered in the workplace? -
-Physical hazards.
Motors are normally protected from overload by a
_______ device. - -thermal
What tool is used to measure the turning force
when tightening a fastener? - -Torque
Wrench
T/F: A two-wire control for a motor will restart
automatically when power is restored after a
power failure. - -True
When working on an electrical, fluid power, or
mechanical system a ____ procedure should be
performed to lock out the energy. - -LOTO
What is the most common machine wire type? -
-THHN
The section of a technical report which
summarizes the report's contents is called what?
- -Abstract T/F: A three-wire controlled motor will restart
automatically after power is restored after a
power failure. - -False
What does a thick line represent in a schematic
diagram? - -Current flow
Jogging is a type of motor control in which what
happens? - -The motors rotation is moved
(bumped) slightly.
A switch is an example of a _____ into a motor
control circuit. - -input
A wire's current carrying limit is known as what? -
-Ampacity
How does the overload of a motor provide
protection when current exceeds a
predetermined value? - -It opens a
normally closed contact. A motor _______ is a motor controller that
includes overload protection. - -Starter
Overload protection is designed to protect the
______________ by disconnecting it from the If a switch is described by the term DPDT, what
Mechatronic) Review
If you inhale phenolic fumes what would happen A Safety Data Sheet (SDS) provides information
to you? - -Trouble breathing about first aid measures, stability and reactivity,
and _____? - -Handling and Storage
A _________ fire extinguisher should be used on
an electrical fire. - -Class C Which of the following is not true of a title block? -
-Format is the same from company to
company.
What does OSHA stand for? - -
Occupational Safety & Health Administration
A NFPA 70E is a regulation that provides
guidelines and details for ___________? - -
Electrical safety
This type of drawing represents a three-
dimensional object using several two-
dimensional views of the object. - -
Orthographic GFCI devices are used for what purpose? -
-To prevent a person from being
electrocuted.
What are linear dimensions usually expressed
in? - -Decimal or Fractional Units
A person with serious electrical injury should be
moved only when _______. - -They are in
immediate danger
What does a filled triangle represent in a fluid
power diagram? - -Hydraulic Flow
What must be provided by chemical
manufacturers, distributors, and importers to
What can happen if bolts and nuts are not anyone who will work with these potentially
properly torqued? - -They wear out quickly dangerous materials? - -Safety Data Sheet
and can cause failure. (SDS).
What safety practice is used to prevent You come across a fellow employee who is being
equipment from being energized? - - electrocuted by becoming attached to a live
Lockout/Tagout electrical circuit, what is the first thing you should
do? - -Shut off the circuit.
, BCTC Industrial Maintenance Technology AMTEC (NOCTI
Mechatronic) Review
power source when an overload is sensed. -
What would slippery floors and cluttered -Electric motor
walkways be considered in the workplace? -
-Physical hazards.
Motors are normally protected from overload by a
_______ device. - -thermal
What tool is used to measure the turning force
when tightening a fastener? - -Torque
Wrench
T/F: A two-wire control for a motor will restart
automatically when power is restored after a
power failure. - -True
When working on an electrical, fluid power, or
mechanical system a ____ procedure should be
performed to lock out the energy. - -LOTO
What is the most common machine wire type? -
-THHN
The section of a technical report which
summarizes the report's contents is called what?
- -Abstract T/F: A three-wire controlled motor will restart
automatically after power is restored after a
power failure. - -False
What does a thick line represent in a schematic
diagram? - -Current flow
Jogging is a type of motor control in which what
happens? - -The motors rotation is moved
(bumped) slightly.
A switch is an example of a _____ into a motor
control circuit. - -input
A wire's current carrying limit is known as what? -
-Ampacity
How does the overload of a motor provide
protection when current exceeds a
predetermined value? - -It opens a
normally closed contact. A motor _______ is a motor controller that
includes overload protection. - -Starter
Overload protection is designed to protect the
______________ by disconnecting it from the If a switch is described by the term DPDT, what
