FDNY G-60
FDNY G-60 Exam Questions and Answers
Question 1
Sprinkler system must NOT be shut off or impaired while hot work is performed
Correct Answer
Place damp cloth guards on individual sprinkler heads
Question 2
The person conducting the fire watch ______ have other duties
Correct Answer
CANNOT
Question 3
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area
Correct Answer
2-A:20-B:C///30
Question 4
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of
______ is required
Correct Answer
3-A:40-B:C
Question 5
Fire watch on floors below is ______
Correct Answer
required
Page 1 of 11
, FDNY G-60
Question 6
The fire watch must continue for a minimum of ____ minutes after the hot work is
done
Correct Answer
30
Question 7
For any CNG or LPG torch operations, the first inspection shall be conducted ___
minutes after completion. The second inspection shall be conducted _______ after
completion of torch operations.
Correct Answer
30 min///1 hour
Question 8
The fire guard or fire watch personnel must complete a signed inspection report and
it must be submitted to and retained by the person in charge of the torch operations.
Correct Answer
The report must be made available and maintained on the premises for a minimum
of 48 hours after the work is complete.
Question 9
Most common fuel gasses used in blowtorches are ______
Correct Answer
LPG (butane, propane) natural gas (methane) (either CNG or piped natural gasses)
Question 10
Soldering and brazing temperatures are typically______
Correct Answer
840 degrees F
Page 2 of 11
FDNY G-60 Exam Questions and Answers
Question 1
Sprinkler system must NOT be shut off or impaired while hot work is performed
Correct Answer
Place damp cloth guards on individual sprinkler heads
Question 2
The person conducting the fire watch ______ have other duties
Correct Answer
CANNOT
Question 3
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area
Correct Answer
2-A:20-B:C///30
Question 4
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of
______ is required
Correct Answer
3-A:40-B:C
Question 5
Fire watch on floors below is ______
Correct Answer
required
Page 1 of 11
, FDNY G-60
Question 6
The fire watch must continue for a minimum of ____ minutes after the hot work is
done
Correct Answer
30
Question 7
For any CNG or LPG torch operations, the first inspection shall be conducted ___
minutes after completion. The second inspection shall be conducted _______ after
completion of torch operations.
Correct Answer
30 min///1 hour
Question 8
The fire guard or fire watch personnel must complete a signed inspection report and
it must be submitted to and retained by the person in charge of the torch operations.
Correct Answer
The report must be made available and maintained on the premises for a minimum
of 48 hours after the work is complete.
Question 9
Most common fuel gasses used in blowtorches are ______
Correct Answer
LPG (butane, propane) natural gas (methane) (either CNG or piped natural gasses)
Question 10
Soldering and brazing temperatures are typically______
Correct Answer
840 degrees F
Page 2 of 11
