TFM02 - FEL B Exam 2025/2026 Actual Complete Real Exam
Questions & Correct Answers | 100% Verified Solutions |
Already Graded A+ / 2025 Latest Exam!!
What are Halgoenated Agents? - ANSWER-Halogen agents are
clean agents.
Including bromochlorodifluoromethane
(Halon 1211), and
bromotrifluoromethane
(Halon 1301)
What does HMIS stand for? - ANSWER-Hazardous Materials
Identification
Sheet
The following information shall be on a fire extinguisher tag -
ANSWER-1. The content's product name as it appears on the
manufacturers Material Safety Data
Sheet (MSDS)
2. List of the HMIS
3. List of any hazardous materials that are in excess of 1.0
percent of the contents.
,4. List of each chemical in excess of 5.0 percent of the contents.
5. Information as to what is hazardous about the agent in
accordance with the
MSDS
6. Manufacturer's or Service agency's name, mailing address,
and phone number.
What hazards does a Class A Fire Extinguisher protect? -
ANSWER-Class A
Fires are ordinary combustible materials such as wood, cloth,
paper, rubber,
and many
plastics.
Use of halon agent fire extinguishers shall be limited to
applications where a ______ _______ is necessary to extinguish
fire efficiently without damaging the equipment. - ANSWER-
Clean Agent
Wheeled fire extinguishers shall be considered for hazard
protection in areas in
which a fire risk assessment has shown _______. -
ANSWER-High hazard
areas are
present.
, Wheeled Fire extinguishers has the following features: -
ANSWER-1. High
agent flow
rate
2. Increased agent stream
range
3. Increased agent
capacity
Extinguishers for Pressurized Liquid and Pressurized Gas fires:
- ANSWER-Large-capacity dry chemical extinguishers of 10 lb
or greater and with a discharge rate of 1 lb/sec or more shall be
selected to protect these hazards.
Extinguishers for Three-Dimensional Fires - ANSWER-Large-
capacity dry chemical extinguishers of 10 lb or greater and with
a discharge rate of 1lb/sec or more shall be selected to protect
these hazards.
Fire extinguishers having a gross weight not exceeding 40lb
shall be installed so that the top of the fire extinguisher is not
more than __ ft above the floor -
ANSWER-5
Questions & Correct Answers | 100% Verified Solutions |
Already Graded A+ / 2025 Latest Exam!!
What are Halgoenated Agents? - ANSWER-Halogen agents are
clean agents.
Including bromochlorodifluoromethane
(Halon 1211), and
bromotrifluoromethane
(Halon 1301)
What does HMIS stand for? - ANSWER-Hazardous Materials
Identification
Sheet
The following information shall be on a fire extinguisher tag -
ANSWER-1. The content's product name as it appears on the
manufacturers Material Safety Data
Sheet (MSDS)
2. List of the HMIS
3. List of any hazardous materials that are in excess of 1.0
percent of the contents.
,4. List of each chemical in excess of 5.0 percent of the contents.
5. Information as to what is hazardous about the agent in
accordance with the
MSDS
6. Manufacturer's or Service agency's name, mailing address,
and phone number.
What hazards does a Class A Fire Extinguisher protect? -
ANSWER-Class A
Fires are ordinary combustible materials such as wood, cloth,
paper, rubber,
and many
plastics.
Use of halon agent fire extinguishers shall be limited to
applications where a ______ _______ is necessary to extinguish
fire efficiently without damaging the equipment. - ANSWER-
Clean Agent
Wheeled fire extinguishers shall be considered for hazard
protection in areas in
which a fire risk assessment has shown _______. -
ANSWER-High hazard
areas are
present.
, Wheeled Fire extinguishers has the following features: -
ANSWER-1. High
agent flow
rate
2. Increased agent stream
range
3. Increased agent
capacity
Extinguishers for Pressurized Liquid and Pressurized Gas fires:
- ANSWER-Large-capacity dry chemical extinguishers of 10 lb
or greater and with a discharge rate of 1 lb/sec or more shall be
selected to protect these hazards.
Extinguishers for Three-Dimensional Fires - ANSWER-Large-
capacity dry chemical extinguishers of 10 lb or greater and with
a discharge rate of 1lb/sec or more shall be selected to protect
these hazards.
Fire extinguishers having a gross weight not exceeding 40lb
shall be installed so that the top of the fire extinguisher is not
more than __ ft above the floor -
ANSWER-5
