,TESTBANK for Designing with SOLIDWORKS 2025
By Michael J. Rider
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
6- Test Bank Solutions at the End of the Chapter
Our email:
,Chapter 01 - Getting Started
1. Historically, SOLIDWORKS has not been backward compatible. In recent versions, has
SOLIDWORKS introduced any backward compatibility?
A) Yes, but only with specific recent versions.
B) Yes, compatible with all previous versions.
C) No, not compatible with any previous version.
2. What does IPS stand for when defining units?
A) Inch-Pound-Second
B) Include-Percent-Sign
C) Interesting Personal Space
3. What are the two necessary steps before you can begin sketching?
A) Select the plane to sketch on, and pick the Sketch icon.
B) Pick a surface to sketch on, then pick the Sketch icon.
C) Pick a surface, then select the dimension tool.
D) Pick the sketch icon, and select the Line tool to draw a line.
4. What does this sketch relation indicate?
A) The line is coincident with another line.
B) The line is at a 45-degree angle.
C) The curve is tangent to another curve.
D) The line is tangent to a curve.
5. How do you change the length of a line that already has a dimension associated with it?
A) Delete the dimension, and add a new dimension.
B) Double-click on the dimension, and enter a new value followed by <Enter>.
6. How do you get out of sketch mode?
A) Pick this icon.
B) Press the <Esc> key.
C) Pick this icon.
7. What does this icon mean?
A) Edit Part
B) Save
C) Save As
8. Where is the FeatureManager Design Tree located on the screen?
A) Left side of the screen
B) Right side of the screen
1
, C) Top of the Screen
9. Which of the following things are shown in the FeatureManager Design Tree?
A) Front plane
B) Annotations
C) Overall size of the part
D) Last date modified
E) Material
10. How do you assign Plain Carbon Steel to the part you just created?
A) Left-click on Material in the FeatureManager Design Tree, pick Plain Carbon Steel.
B) Type Material, then enter the name of the material to be assigned.
C) Right-click on Material in the FeatureManager Design Tree, pick Plain Carbon Steel.
2
, Answer Keys
Question Answer Question Answer
1 A 6 C
2 A 7 B
3 AB 8 A
4 CD 9 ABE
5 B 10 C
3
By Michael J. Rider
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
6- Test Bank Solutions at the End of the Chapter
Our email:
,Chapter 01 - Getting Started
1. Historically, SOLIDWORKS has not been backward compatible. In recent versions, has
SOLIDWORKS introduced any backward compatibility?
A) Yes, but only with specific recent versions.
B) Yes, compatible with all previous versions.
C) No, not compatible with any previous version.
2. What does IPS stand for when defining units?
A) Inch-Pound-Second
B) Include-Percent-Sign
C) Interesting Personal Space
3. What are the two necessary steps before you can begin sketching?
A) Select the plane to sketch on, and pick the Sketch icon.
B) Pick a surface to sketch on, then pick the Sketch icon.
C) Pick a surface, then select the dimension tool.
D) Pick the sketch icon, and select the Line tool to draw a line.
4. What does this sketch relation indicate?
A) The line is coincident with another line.
B) The line is at a 45-degree angle.
C) The curve is tangent to another curve.
D) The line is tangent to a curve.
5. How do you change the length of a line that already has a dimension associated with it?
A) Delete the dimension, and add a new dimension.
B) Double-click on the dimension, and enter a new value followed by <Enter>.
6. How do you get out of sketch mode?
A) Pick this icon.
B) Press the <Esc> key.
C) Pick this icon.
7. What does this icon mean?
A) Edit Part
B) Save
C) Save As
8. Where is the FeatureManager Design Tree located on the screen?
A) Left side of the screen
B) Right side of the screen
1
, C) Top of the Screen
9. Which of the following things are shown in the FeatureManager Design Tree?
A) Front plane
B) Annotations
C) Overall size of the part
D) Last date modified
E) Material
10. How do you assign Plain Carbon Steel to the part you just created?
A) Left-click on Material in the FeatureManager Design Tree, pick Plain Carbon Steel.
B) Type Material, then enter the name of the material to be assigned.
C) Right-click on Material in the FeatureManager Design Tree, pick Plain Carbon Steel.
2
, Answer Keys
Question Answer Question Answer
1 A 6 C
2 A 7 B
3 AB 8 A
4 CD 9 ABE
5 B 10 C
3
