AED Final Exam Review
___ form threads by displacing material rather than cutting it. - Answer-Thread-forming
screws
___ washers are used to help withstand vibration - Answer-Lock
___ washers distribute the load and eliminate the need for a countersunk hole - Answer-
Finishing
A ___ has a head on one end and is threaded on the other end to receive a nut. -
Answer-Bolt
A ___ is a rod threaded on both ends to be screwed into a part with mating internal
threads. - Answer-Stud
A ___ is similar to a cap screw, except it is smaller and has a slotted head. - Answer-
Machine screw
All of the above - Answer-Which of the following may be found using an auxiliary view?
Angle of a line measured from either the N or S - Answer-Define bearing
Any mechanical device used to attach two or more pieces or parts together in a fixed
position - Answer-Define fastener
Assembly drawing - Answer-What type of drawing depicts the assembled relationship or
positions of two or more detailed parts of the parts and sub assemblies that comprise a
unit?
Blocks - Answer-Symbols for use on CAD drawings are called?
Cadastral - Answer-A ___ map is drawn to a scale large enough to accurately show the
locations of streets, property lines, buildings, and other features of a town or city
Cartography - Answer-The science of map making is called ___
Casting - Answer-___ is the process of pouring molten metal into a mold where t
hardens into the desired form as it cools
Clockwise - Answer-A right-hand thread advances into its mating part when turned in a
___ direction on its axis.
___ form threads by displacing material rather than cutting it. - Answer-Thread-forming
screws
___ washers are used to help withstand vibration - Answer-Lock
___ washers distribute the load and eliminate the need for a countersunk hole - Answer-
Finishing
A ___ has a head on one end and is threaded on the other end to receive a nut. -
Answer-Bolt
A ___ is a rod threaded on both ends to be screwed into a part with mating internal
threads. - Answer-Stud
A ___ is similar to a cap screw, except it is smaller and has a slotted head. - Answer-
Machine screw
All of the above - Answer-Which of the following may be found using an auxiliary view?
Angle of a line measured from either the N or S - Answer-Define bearing
Any mechanical device used to attach two or more pieces or parts together in a fixed
position - Answer-Define fastener
Assembly drawing - Answer-What type of drawing depicts the assembled relationship or
positions of two or more detailed parts of the parts and sub assemblies that comprise a
unit?
Blocks - Answer-Symbols for use on CAD drawings are called?
Cadastral - Answer-A ___ map is drawn to a scale large enough to accurately show the
locations of streets, property lines, buildings, and other features of a town or city
Cartography - Answer-The science of map making is called ___
Casting - Answer-___ is the process of pouring molten metal into a mold where t
hardens into the desired form as it cools
Clockwise - Answer-A right-hand thread advances into its mating part when turned in a
___ direction on its axis.
