ANSWERS| 100% CORRECT| GRADED A+|100% PASS
1. What happens in a circuit, when the capacitor voltage equals the source voltage? -
✔ANSWER Current flow stops in the circuit
2. In capacitors, what is the purpose of the dielectric? - ✔ANSWER Prevent arcing
within the capacitor
3. if current through the load increases, current through the zener decreases. This
describes what type of regulator? - ✔ANSWER Shunt regulator
4. What is the base 16 system commonly called? - ✔ANSWER hexadecimal
5. What numbering system uses one of the tow digits to represent each positional value? -
✔ANSWER Binary
6. Method of the proper care and handling of printed circuit boards. - ✔ANSWER
Always remove power when installing or removing the boards.
7. The type of voltage arrangement associated with the driver circuit with the output at the
potential of the power supply to the circuit? - ✔ANSWER source
8. What is the binary equivalent of 17(10) - ✔ANSWER 0001 0001
9. What is the binary equivalent of 68(10) - ✔ANSWER 0100 0100
10. What is the hexadecimal equivalent of 001 1101(2) - ✔ANSWER 1D
, 11. What is the hexadecimal equivalent of 0010 1111 1001(2) - ✔ANSWER 2F9
12. Current flow from positive to negative is described as - ✔ANSWER conventional flow
13. Current flow from negative to positive is called - ✔ANSWER electron flow
14. By increases the distance between the plates we ________ the charge capacity -
✔ANSWER decrease
15. Which of the following is true about capacitors in AC circuits? - ✔ANSWER Current
leads voltage all the time
16. What describes a capacitor s ability to store an electrical charge? - ✔ANSWER
Capacitance
17. which of the following statements is correct about polarized electrolytic capacitors? -
✔ANSWER Voltage polarity must be correct
18. What is the time constant for a circuit with 150k ohms and 2 microfarad capacitor? -
✔ANSWER .3 seconds
19. If frequency is increased in a capacitave circuit what will happen? - ✔ANSWER
Capacitive reactance will decrease
20. What happens in a circuit, when the capacitor voltage equals the source voltage? -
✔ANSWER Current flow stops in the circuit
21. In a DC circuit, which is correct about capacitors the instant when power is applied? -
✔ANSWER Current is maximum