BMW Associate level ASE Exam
BMW ASSOCIATE LEVEL ASE EXAM NEWEST 2025/2026
COMPLETE ALL QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW
VERSION!
BMW special took 83 30 0 492 467 can be used during an inspection to measure:
Coolant level
Coolant concentrate
Brake pad thickness and tire thread depth
Air pressure - ANSWER-Brake pad thickness and tire thread depth
Tech A states that during a Quality Certification 1 on a G05 X5 it is necessary to
press the 'AUTO' button in the light switch cluster.
Tech B states that during a Quality Certification 1 on a G05 X5 you can use the
same QC1 inspection sheet as a G02. - ANSWER-Both A and B
If the vehicle is placed in transport mode and the vehicle battery voltage drops
below 12 volts (approximately 30% State of Charge), the "Replace Battery"
message will be displayed in the instrument cluster.
Tech A says that charging the battery back to 100% State of Charge and clearing
faults will remove the message from the instrument cluster.
1|Page
, BMW Associate level ASE Exam
Tech B says that running Energy Diagnosis and clearing faults will remove the
message from the instrument cluster. - ANSWER-Neither A nor B
Transport Mode Switching Device can be used to successfully perform a QC1
inspection.
True or False? - ANSWER-False
Tech A states that on 2019 Quality Certification 1 the DOT (Department of
Transportation) numbers from each tire's sidewall do not need to be recorded for
factory-fitted tires. The DOT numbers were recorded at the manufacturing plant
and stored in a proprietary database.
Tech B states that if a BMW-approved accessory wheel set is installed by the BMW
center prior to customer delivery, the DOT numbers from the accessory tires must
be recorded on an individually printed QC1 checklist. - ANSWER-Both A and B
a lifting pad must be in place to lift a BMW vehicle, T or F? - ANSWER-True
Under which section in TIS is the User Manual for the DEUTRONIC battery charger
located? - ANSWER-Tools and Equipment
Regarding BMW instrument cluster test function.
Tech A states the cluster can be unlocked, and a test function can be used to
display fuel level reading in liters.
2|Page
BMW ASSOCIATE LEVEL ASE EXAM NEWEST 2025/2026
COMPLETE ALL QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW
VERSION!
BMW special took 83 30 0 492 467 can be used during an inspection to measure:
Coolant level
Coolant concentrate
Brake pad thickness and tire thread depth
Air pressure - ANSWER-Brake pad thickness and tire thread depth
Tech A states that during a Quality Certification 1 on a G05 X5 it is necessary to
press the 'AUTO' button in the light switch cluster.
Tech B states that during a Quality Certification 1 on a G05 X5 you can use the
same QC1 inspection sheet as a G02. - ANSWER-Both A and B
If the vehicle is placed in transport mode and the vehicle battery voltage drops
below 12 volts (approximately 30% State of Charge), the "Replace Battery"
message will be displayed in the instrument cluster.
Tech A says that charging the battery back to 100% State of Charge and clearing
faults will remove the message from the instrument cluster.
1|Page
, BMW Associate level ASE Exam
Tech B says that running Energy Diagnosis and clearing faults will remove the
message from the instrument cluster. - ANSWER-Neither A nor B
Transport Mode Switching Device can be used to successfully perform a QC1
inspection.
True or False? - ANSWER-False
Tech A states that on 2019 Quality Certification 1 the DOT (Department of
Transportation) numbers from each tire's sidewall do not need to be recorded for
factory-fitted tires. The DOT numbers were recorded at the manufacturing plant
and stored in a proprietary database.
Tech B states that if a BMW-approved accessory wheel set is installed by the BMW
center prior to customer delivery, the DOT numbers from the accessory tires must
be recorded on an individually printed QC1 checklist. - ANSWER-Both A and B
a lifting pad must be in place to lift a BMW vehicle, T or F? - ANSWER-True
Under which section in TIS is the User Manual for the DEUTRONIC battery charger
located? - ANSWER-Tools and Equipment
Regarding BMW instrument cluster test function.
Tech A states the cluster can be unlocked, and a test function can be used to
display fuel level reading in liters.
2|Page
