USPA Category H Quiz 2025-2026 Most Recent
Version Comprehensive Questions and Verified
Answers Accurate Solutions Already Graded A+
Get it 100% Correct
1) Why is it important to look ahead during a swoop toward other jumpers in freefall?
a) To maximize your speed.
b) To maintain heading.
c) To see others and avoid a collision. - CORRECT ANSWER: c) To see others and
avoid a collision.
2) What is the fastest way to slow down from a freefall swoop approach?
a) Aggressive arch.
b) Slow fall position with arms forward and knees down.
c) Arms back at waist and legs straight. - CORRECT ANSWER: b) Slow fall position with
arms forward and knees down.
3) What is the danger of a loose or worn main container closing loop?
a) Premature deployment.
b) AAD fire.
c) Line over malfunction. - CORRECT ANSWER: a) Premature deployment.
4) Why must three-ring release cables be cleaned periodically?
, a) Oxidation will cause microscopic burrs on metal which could tear fabric.
b) To remove tar build up.
c) Corrosion deposits cause them to bind. - CORRECT ANSWER: c) Corrosion deposits
cause them to bind.
5) If you see that you have begun to turn too low to the ground for a safe landing, what
should be your first response?
a) Quickly use toggle controls to turn in the opposite direction.
b) Neutralize the turn and get the canopy overhead.
c) Prepare to PLF. - CORRECT ANSWER: b) Neutralize the turn and get the canopy
overhead.
6) What effect does pulling on the front risers have on the canopy?
a) Dramatic increase in rate of descent.
b) Dramatic decrease in rate of descent.
c) Dramatic increase in forward speed. - CORRECT ANSWER: a) Dramatic increase in
rate of descent.
7) When performing front riser maneuvers, what should you do with the toggles?
a) Stow them.
b) Keep them away from the front risers.
c) Keep them in your hands. - CORRECT ANSWER: c) Keep them in your hands.
8) What are the two biggest dangers of front-riser maneuvers near the ground?
Version Comprehensive Questions and Verified
Answers Accurate Solutions Already Graded A+
Get it 100% Correct
1) Why is it important to look ahead during a swoop toward other jumpers in freefall?
a) To maximize your speed.
b) To maintain heading.
c) To see others and avoid a collision. - CORRECT ANSWER: c) To see others and
avoid a collision.
2) What is the fastest way to slow down from a freefall swoop approach?
a) Aggressive arch.
b) Slow fall position with arms forward and knees down.
c) Arms back at waist and legs straight. - CORRECT ANSWER: b) Slow fall position with
arms forward and knees down.
3) What is the danger of a loose or worn main container closing loop?
a) Premature deployment.
b) AAD fire.
c) Line over malfunction. - CORRECT ANSWER: a) Premature deployment.
4) Why must three-ring release cables be cleaned periodically?
, a) Oxidation will cause microscopic burrs on metal which could tear fabric.
b) To remove tar build up.
c) Corrosion deposits cause them to bind. - CORRECT ANSWER: c) Corrosion deposits
cause them to bind.
5) If you see that you have begun to turn too low to the ground for a safe landing, what
should be your first response?
a) Quickly use toggle controls to turn in the opposite direction.
b) Neutralize the turn and get the canopy overhead.
c) Prepare to PLF. - CORRECT ANSWER: b) Neutralize the turn and get the canopy
overhead.
6) What effect does pulling on the front risers have on the canopy?
a) Dramatic increase in rate of descent.
b) Dramatic decrease in rate of descent.
c) Dramatic increase in forward speed. - CORRECT ANSWER: a) Dramatic increase in
rate of descent.
7) When performing front riser maneuvers, what should you do with the toggles?
a) Stow them.
b) Keep them away from the front risers.
c) Keep them in your hands. - CORRECT ANSWER: c) Keep them in your hands.
8) What are the two biggest dangers of front-riser maneuvers near the ground?
