Certified Playground Safety Inspector CPSI Sample Exam Questions
Study online at https://quizlet.com/_8jn6ra
1. To be compliant with ASTM 1487, a designer or provide buyers with a parts list for
manufacturer of playground equipment should the playground
2. 2. The fish or wedge probe is used to determine a partially bounded opening
whether or not a hazard exists on
3. 3. Which of the following is correct regarding the Critical height must equal or ex-
impact-attenuation of surfacing material ceed fall height
4. 4. When evaluating the structural integrity of a hire a licensed professional engi-
support structure for a swing that appears to be neer to certify the integrity of the
failing, a CPSI should equipment
5. 5. Manufacturers of playground equipment must:
provide the manufacturer's identification of the
equipment
6. 6. The majority of injuries associated with play- falls to the surface on which the
ground equipment result from equipment was located
7. 7. An opening may present a common crush or grabs the 5/8" (16mm) dowel
shear hazard only if it
8. 8. The criteria for unitary surface materials in- ASTM F1292 and F1487
cludes meeting requirements of
9. 9. Regarding playground safety signage, which of Signage may not prevent acci-
the following is correct dents but may reduce liability
10. 10. Which of the following factors is MOST impor- Type of surfacing and amount of
tant when determining the frequency of inspec- use
tions of surfacing
11.
1/9
, Certified Playground Safety Inspector CPSI Sample Exam Questions
Study online at https://quizlet.com/_8jn6ra
11. When planning a playground for public use, be appropriate for the age of in-
the play equipment that is chosen must tended users
12. 12. A spring rocker with seat height of 26" is about 108" or 9'
to be installed adjacent to the side of a fully en-
closed bucket swing set. The minimum distance
required between the swing set and the rocker is
13. 13. The Site History File for a playground should a comprehensive inventory of all
contains equipment, a parts list, mainte-
nance, and inspection recommen-
dations
14. 14. What is the minimum use zone between 156" or 13'
a stand-alone climber and a standing-rock-
ing/springing playground piece
15. 15. The _____ of each play structure shall provide Manufacturer
clear and concise inspection instructions
16. 16. Heights of guardrails and protective barriers Center of gravity
are determined by which of the following charac-
teristics of children
17. 17. Which of the following is allowed on a public Swinging exercise rings less than
playground 7" in length are approved for pub-
lic playgrounds
18. 18. A component on stationary equipment that protrusion
fits within a projection gauge and extends be-
yond the face of the gauge is technically defined
as a
19.
2/9
Study online at https://quizlet.com/_8jn6ra
1. To be compliant with ASTM 1487, a designer or provide buyers with a parts list for
manufacturer of playground equipment should the playground
2. 2. The fish or wedge probe is used to determine a partially bounded opening
whether or not a hazard exists on
3. 3. Which of the following is correct regarding the Critical height must equal or ex-
impact-attenuation of surfacing material ceed fall height
4. 4. When evaluating the structural integrity of a hire a licensed professional engi-
support structure for a swing that appears to be neer to certify the integrity of the
failing, a CPSI should equipment
5. 5. Manufacturers of playground equipment must:
provide the manufacturer's identification of the
equipment
6. 6. The majority of injuries associated with play- falls to the surface on which the
ground equipment result from equipment was located
7. 7. An opening may present a common crush or grabs the 5/8" (16mm) dowel
shear hazard only if it
8. 8. The criteria for unitary surface materials in- ASTM F1292 and F1487
cludes meeting requirements of
9. 9. Regarding playground safety signage, which of Signage may not prevent acci-
the following is correct dents but may reduce liability
10. 10. Which of the following factors is MOST impor- Type of surfacing and amount of
tant when determining the frequency of inspec- use
tions of surfacing
11.
1/9
, Certified Playground Safety Inspector CPSI Sample Exam Questions
Study online at https://quizlet.com/_8jn6ra
11. When planning a playground for public use, be appropriate for the age of in-
the play equipment that is chosen must tended users
12. 12. A spring rocker with seat height of 26" is about 108" or 9'
to be installed adjacent to the side of a fully en-
closed bucket swing set. The minimum distance
required between the swing set and the rocker is
13. 13. The Site History File for a playground should a comprehensive inventory of all
contains equipment, a parts list, mainte-
nance, and inspection recommen-
dations
14. 14. What is the minimum use zone between 156" or 13'
a stand-alone climber and a standing-rock-
ing/springing playground piece
15. 15. The _____ of each play structure shall provide Manufacturer
clear and concise inspection instructions
16. 16. Heights of guardrails and protective barriers Center of gravity
are determined by which of the following charac-
teristics of children
17. 17. Which of the following is allowed on a public Swinging exercise rings less than
playground 7" in length are approved for pub-
lic playgrounds
18. 18. A component on stationary equipment that protrusion
fits within a projection gauge and extends be-
yond the face of the gauge is technically defined
as a
19.
2/9
