1|Page
NICET FIRE ALARM LEVEL I EXAM LATEST 2025/2026 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
A meter will be used to measure a horn strobe circuit current
draw. Which of the following statements is correct? - ANSWER-
The meter should be connected in series with the circuit; it must
be located before the first device(horn or strobe). ?
Which plans include a fire detection system details? - ANSWER-
electrical
Wall-mounted audible signal appliances shall be mounted how
many inches below finished ceiling? - ANSWER-6 inches
minimum
A Crew member has a suspected leg fracture. Before moving the
crew member, what is the recommended first step I'm treating the
injury? - ANSWER-Immobilize the leg
,2|Page
How often shall alarm notification appliances be tested? -
ANSWER-Every 12 months
We're the outgoing and return conductors enter or exit notification
of clients, the conductors are permitted to run in the same cable
assembly for up to which maximum distance? - ANSWER-10
feet?
Which part requires special handling or disposal? - ANSWER-lead
acid batteries
What is the minimum acceptable size of conductors for multi
conductor cables? - ANSWER-26 AWG
Which type of detector is recommended for protecting atriums and
similar open spaces? - ANSWER-projected beam-type
Which type of fire alarm key blank must be used for a run that will
be installed in a Plenum space? - ANSWER-FPLP
, 3|Page
It technician notices that a step is missing from the letter which
two are the current courses of action? - ANSWER-Notify a
supervisor; Tag the ladder to prevent others from using it.
The minimum size for EMT is - ANSWER-1/2 inch
The maximum size fro EMT is - ANSWER-4 inches
EMT shall be securely fastened in place at least every -
ANSWER-10 feet
A load where the maximum current is expected to continue for 3
hours or more. - ANSWER-Continuous Load
The maximum current, in amperes, that a conductor can carry
continuously under the conditions of use without exceeding its
temperature rating. - ANSWER-Ampacity
A device intended to provide protection from the effects of arc
faults by the recognizing characteristics unique to arcing and by
NICET FIRE ALARM LEVEL I EXAM LATEST 2025/2026 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
A meter will be used to measure a horn strobe circuit current
draw. Which of the following statements is correct? - ANSWER-
The meter should be connected in series with the circuit; it must
be located before the first device(horn or strobe). ?
Which plans include a fire detection system details? - ANSWER-
electrical
Wall-mounted audible signal appliances shall be mounted how
many inches below finished ceiling? - ANSWER-6 inches
minimum
A Crew member has a suspected leg fracture. Before moving the
crew member, what is the recommended first step I'm treating the
injury? - ANSWER-Immobilize the leg
,2|Page
How often shall alarm notification appliances be tested? -
ANSWER-Every 12 months
We're the outgoing and return conductors enter or exit notification
of clients, the conductors are permitted to run in the same cable
assembly for up to which maximum distance? - ANSWER-10
feet?
Which part requires special handling or disposal? - ANSWER-lead
acid batteries
What is the minimum acceptable size of conductors for multi
conductor cables? - ANSWER-26 AWG
Which type of detector is recommended for protecting atriums and
similar open spaces? - ANSWER-projected beam-type
Which type of fire alarm key blank must be used for a run that will
be installed in a Plenum space? - ANSWER-FPLP
, 3|Page
It technician notices that a step is missing from the letter which
two are the current courses of action? - ANSWER-Notify a
supervisor; Tag the ladder to prevent others from using it.
The minimum size for EMT is - ANSWER-1/2 inch
The maximum size fro EMT is - ANSWER-4 inches
EMT shall be securely fastened in place at least every -
ANSWER-10 feet
A load where the maximum current is expected to continue for 3
hours or more. - ANSWER-Continuous Load
The maximum current, in amperes, that a conductor can carry
continuously under the conditions of use without exceeding its
temperature rating. - ANSWER-Ampacity
A device intended to provide protection from the effects of arc
faults by the recognizing characteristics unique to arcing and by
