Neiep 515 Piping and Wiring The Car Ques ons and
answers Newest RATED A+ 2025/2026 NEW!!
One-half - CORRECT ANSWERS The Loop that is formed in the traveling cables at _______ the
speed of the car
Bracke"ng a#ached to the guide rail, the hoistway wall, or the building structure - CORRECT
ANSWERS The sta"onary end of the traveling cable is fastened to _______, _______, or
_______
Signal - CORRECT ANSWERS Each wire carries a specific electrical ________ between the car
and the machine room controls
Strain wire - CORRECT ANSWERS The steel core is called the _______
Reduce fric"on and enhance flexibility - CORRECT ANSWERS Jute fibers are included to
_______ and _______
Torsional stress - CORRECT ANSWERS Before they are permanently installed, traveling cables
should be hung free in order to relieve _______
Spool - CORRECT ANSWERS On Lengths up to 100 feet _______ supports may be used
200 Feet - CORRECT ANSWERS On lengths over _______ the strain wire must be used for
suspension
Junc"on box - CORRECT ANSWERS At the permanent suspension point in the hoistway, slightly
above the center of travel, an electrical _______ may be installed
, 200 - CORRECT ANSWERS Cable grippers may be used to suspend up to _______ feet of
traveling cable
Controller - CORRECT ANSWERS On a low-rise installa"on, such as a hydraulic elevator, the
traveling cables may run to the _______
Fully compressed buffer - CORRECT ANSWERS On a high rise elevator with a deep pit, the
reference point for the lop in the traveling cable will be above the pit floor, where the car rests
on the _______
Reel rollers, reel jacks, saw horses - CORRECT ANSWERS When the traveling cable is received
on reels, the reels can be set up on _______, _______, _______
Split cable gripper and swivel link - CORRECT ANSWERS When raising traveling cables with a
hois"ng line, the line should be connected with a _______
Public safety - CORRECT ANSWERS On a cable replacement job, in an occupied building, the
thing to keep uppermost in your mind is _______
Brackets, switches, buffers - CORRECT ANSWERS The pit o3en contains hazards to the traveling
cables, such as _______, _______, and _______
Hose or escalator handrail - CORRECT ANSWERS The divider beams can be padded with
_______ or _______
Wire mesh - CORRECT ANSWERS The complete area traveled by the cables can be protected
with _______
answers Newest RATED A+ 2025/2026 NEW!!
One-half - CORRECT ANSWERS The Loop that is formed in the traveling cables at _______ the
speed of the car
Bracke"ng a#ached to the guide rail, the hoistway wall, or the building structure - CORRECT
ANSWERS The sta"onary end of the traveling cable is fastened to _______, _______, or
_______
Signal - CORRECT ANSWERS Each wire carries a specific electrical ________ between the car
and the machine room controls
Strain wire - CORRECT ANSWERS The steel core is called the _______
Reduce fric"on and enhance flexibility - CORRECT ANSWERS Jute fibers are included to
_______ and _______
Torsional stress - CORRECT ANSWERS Before they are permanently installed, traveling cables
should be hung free in order to relieve _______
Spool - CORRECT ANSWERS On Lengths up to 100 feet _______ supports may be used
200 Feet - CORRECT ANSWERS On lengths over _______ the strain wire must be used for
suspension
Junc"on box - CORRECT ANSWERS At the permanent suspension point in the hoistway, slightly
above the center of travel, an electrical _______ may be installed
, 200 - CORRECT ANSWERS Cable grippers may be used to suspend up to _______ feet of
traveling cable
Controller - CORRECT ANSWERS On a low-rise installa"on, such as a hydraulic elevator, the
traveling cables may run to the _______
Fully compressed buffer - CORRECT ANSWERS On a high rise elevator with a deep pit, the
reference point for the lop in the traveling cable will be above the pit floor, where the car rests
on the _______
Reel rollers, reel jacks, saw horses - CORRECT ANSWERS When the traveling cable is received
on reels, the reels can be set up on _______, _______, _______
Split cable gripper and swivel link - CORRECT ANSWERS When raising traveling cables with a
hois"ng line, the line should be connected with a _______
Public safety - CORRECT ANSWERS On a cable replacement job, in an occupied building, the
thing to keep uppermost in your mind is _______
Brackets, switches, buffers - CORRECT ANSWERS The pit o3en contains hazards to the traveling
cables, such as _______, _______, and _______
Hose or escalator handrail - CORRECT ANSWERS The divider beams can be padded with
_______ or _______
Wire mesh - CORRECT ANSWERS The complete area traveled by the cables can be protected
with _______
