1
COG200v Cogito
COG200v Cogito Tools Administration
Exam 100% Verified Questions &
Answers | Grade A (2026/2027 Update)
How do you identify your record ID's - ANS ✓In Record Viewer. Templates
add a level of complexity to the process because you need to find three
record IDs.
Chapter 1 Master files name and item and link for a template - ANS ✓1.
(Report template) HGR Item 90 link to (Param Prompt) HGP item 25 link to
(Query Template) HGT
Chapter 1 In basic setting "report content" Dynamically calculated
definition and how it works - ANS ✓When the search runs, the records and
contacts that meet the report's criteria are found. This list is recorded as
the report's results. Each time the results are viewed, the contents of all
the report's display columns are recalculated. This makes the report
relatively less performance-intensive to run, but relatively more
performance-intensive to load.
Chapter 1 In basic settings "Report Content" Statically saved during search
definition and how it works - ANS ✓When the search runs, the records and
contacts that meet the report's criteria are found and used to calculate to
contents of all the display columns. The full results, including column
values, are recorded. Each time the results are viewed, the stored results
are loaded with no additional calculations. This makes the report relatively
COG200v Cogito
, 2
COG200v Cogito
more performance-intensive to run, but relatively less performance-
intensive to load.
Chapter 1 Tags set at the template level are inherited by.. - ANS ✓all reports
built from that template
Chapter 1 Tags set at the report level are added to which tags - ANS ✓Tags
set at the report level are added to the tags inherited from the template.
Chapter 1 On the Query Template form of the Template Editor, you can view
and configure .... - ANS ✓basic information about the query that the
template will use.
Chapter 1 On the Query Template form "Search on ﴾Required﴿" record -
define - ANS ✓Records - Template should search for records. If any contact
or
combination of contacts in the record can satisfy the search's criteria, then
the record will be returned. In the results of a record-based search, each
result is one record. If multiple contacts met your criteria, the most recent
contact's data will be displayed.
Chapter 1 On the Query Template form "Search on ﴾Required﴿" Contacts -
define - ANS ✓Contacts - Template should search each contact
independently. In order for a contact to be returned, it must satisfy all
criteria. In the results of a contact-based search, each result is one contact.
That means that a single record may appear many times if it has many
contacts which satisfy the search criteria.
Chapter 1 On the Query Template "Record & Contact Filters for Query"
Extensions how are they used - ANS ✓Extensions can be specified here to
COG200v Cogito
, 3
COG200v Cogito
filter certain records or contacts out of the results returned by this
template. Examples include RW BREAK THE GLASS, a record select
extension that filters out any patients whose records the report runner
does not have access to view, and RW SENSITIVE CONTACT, a contact select
extension which filters out any contacts the report runner does not have
access to view.
Chapter 1 Before you add a parameter to a template, you must - ANS ✓find
out the INI and item of the data point that you want the parameter to
search for.
Chapter 1 Parameters in a template: How can you determine what master
files the template knows how to work with? - ANS ✓You can determine this
master file by looking at the Query Template form.
Chapter 1 Parameters in a template: what Parameters can you search from.
- ANS ✓You can include parameters that search any item from the base
search master file in your Reporting Workbench query
Chapter 1 Parameters in a template: How can you includes Parameters not
in the base mater file? - ANS ✓You will need to network out to those
additional master files
Chapter 1 The Query Template > Parameters form contains a list of which
parameters? - ANS ✓It contains a list of parameters that the query can
search for
Chapter 1 The Query Template > Parameters:How can you tell which
parameters are searching the base search master file and which are
COG200v Cogito
, 4
COG200v Cogito
networking out to additional master files - ANS ✓by looking at the Basic tab
for each criterion.
Chapter 1 The Query Template > Parameters:On the Basic tab of the right
hand side, the Item field tells you the item number this parameter is
searching. Since no master file is specified, which master file is used? - ANS
✓this is an item in the base search master file.
Chapter 1 What are the three types of parameters that you will see on the
Query Template > Parameters form? - ANS ✓*Simple Parameters evaluate
an item in the search master file.
*Networked Parameters evaluate an item in a different master file that can
be networked to from the search master file.
*Property parameters evaluate the results of a formula programmed in M
code.
Chapter 1 Query Parameter Wizard shows... - ANS ✓The wizard shows all
items from the base search master file. Choose a networked item in the
base search master file to define a path to a new master file.
The networked items appear in blue text, have the Networked icon next to
them, and display the INI they
network to in parentheses.
Chapter 1 Modify the Default Settings of a Parameter: Multiple values - ANS
✓Check this box if the report user will be able to supply this parameter
with multiple operator/value combinations to find during the search
Chapter 1 Modify the Default Settings of a Parameter: Overtime criterion -
ANS ✓Check this box if the item is an overtime item. This will cause an icon
COG200v Cogito
COG200v Cogito
COG200v Cogito Tools Administration
Exam 100% Verified Questions &
Answers | Grade A (2026/2027 Update)
How do you identify your record ID's - ANS ✓In Record Viewer. Templates
add a level of complexity to the process because you need to find three
record IDs.
Chapter 1 Master files name and item and link for a template - ANS ✓1.
(Report template) HGR Item 90 link to (Param Prompt) HGP item 25 link to
(Query Template) HGT
Chapter 1 In basic setting "report content" Dynamically calculated
definition and how it works - ANS ✓When the search runs, the records and
contacts that meet the report's criteria are found. This list is recorded as
the report's results. Each time the results are viewed, the contents of all
the report's display columns are recalculated. This makes the report
relatively less performance-intensive to run, but relatively more
performance-intensive to load.
Chapter 1 In basic settings "Report Content" Statically saved during search
definition and how it works - ANS ✓When the search runs, the records and
contacts that meet the report's criteria are found and used to calculate to
contents of all the display columns. The full results, including column
values, are recorded. Each time the results are viewed, the stored results
are loaded with no additional calculations. This makes the report relatively
COG200v Cogito
, 2
COG200v Cogito
more performance-intensive to run, but relatively less performance-
intensive to load.
Chapter 1 Tags set at the template level are inherited by.. - ANS ✓all reports
built from that template
Chapter 1 Tags set at the report level are added to which tags - ANS ✓Tags
set at the report level are added to the tags inherited from the template.
Chapter 1 On the Query Template form of the Template Editor, you can view
and configure .... - ANS ✓basic information about the query that the
template will use.
Chapter 1 On the Query Template form "Search on ﴾Required﴿" record -
define - ANS ✓Records - Template should search for records. If any contact
or
combination of contacts in the record can satisfy the search's criteria, then
the record will be returned. In the results of a record-based search, each
result is one record. If multiple contacts met your criteria, the most recent
contact's data will be displayed.
Chapter 1 On the Query Template form "Search on ﴾Required﴿" Contacts -
define - ANS ✓Contacts - Template should search each contact
independently. In order for a contact to be returned, it must satisfy all
criteria. In the results of a contact-based search, each result is one contact.
That means that a single record may appear many times if it has many
contacts which satisfy the search criteria.
Chapter 1 On the Query Template "Record & Contact Filters for Query"
Extensions how are they used - ANS ✓Extensions can be specified here to
COG200v Cogito
, 3
COG200v Cogito
filter certain records or contacts out of the results returned by this
template. Examples include RW BREAK THE GLASS, a record select
extension that filters out any patients whose records the report runner
does not have access to view, and RW SENSITIVE CONTACT, a contact select
extension which filters out any contacts the report runner does not have
access to view.
Chapter 1 Before you add a parameter to a template, you must - ANS ✓find
out the INI and item of the data point that you want the parameter to
search for.
Chapter 1 Parameters in a template: How can you determine what master
files the template knows how to work with? - ANS ✓You can determine this
master file by looking at the Query Template form.
Chapter 1 Parameters in a template: what Parameters can you search from.
- ANS ✓You can include parameters that search any item from the base
search master file in your Reporting Workbench query
Chapter 1 Parameters in a template: How can you includes Parameters not
in the base mater file? - ANS ✓You will need to network out to those
additional master files
Chapter 1 The Query Template > Parameters form contains a list of which
parameters? - ANS ✓It contains a list of parameters that the query can
search for
Chapter 1 The Query Template > Parameters:How can you tell which
parameters are searching the base search master file and which are
COG200v Cogito
, 4
COG200v Cogito
networking out to additional master files - ANS ✓by looking at the Basic tab
for each criterion.
Chapter 1 The Query Template > Parameters:On the Basic tab of the right
hand side, the Item field tells you the item number this parameter is
searching. Since no master file is specified, which master file is used? - ANS
✓this is an item in the base search master file.
Chapter 1 What are the three types of parameters that you will see on the
Query Template > Parameters form? - ANS ✓*Simple Parameters evaluate
an item in the search master file.
*Networked Parameters evaluate an item in a different master file that can
be networked to from the search master file.
*Property parameters evaluate the results of a formula programmed in M
code.
Chapter 1 Query Parameter Wizard shows... - ANS ✓The wizard shows all
items from the base search master file. Choose a networked item in the
base search master file to define a path to a new master file.
The networked items appear in blue text, have the Networked icon next to
them, and display the INI they
network to in parentheses.
Chapter 1 Modify the Default Settings of a Parameter: Multiple values - ANS
✓Check this box if the report user will be able to supply this parameter
with multiple operator/value combinations to find during the search
Chapter 1 Modify the Default Settings of a Parameter: Overtime criterion -
ANS ✓Check this box if the item is an overtime item. This will cause an icon
COG200v Cogito
