Page 1 of 45
Fire Fighter 1EXAM 2025 PRACTICE GRADED A+ QUESTIONS WITH CORRECT
ANSWERS 2025-2026 VERIFIED
When placed at the correct angle for climbing, the ratio of the ladder's vertical
reach to distance of the butt from the structure is _____ to one.
four
three
two
five
four
A soft sleeve hose is used to connect a pumper to a:
static water supply.
master stream device.
standpipe/FDC.
hydrant.
hydrant.
Compared to fog nozzle streams, smooth-bore nozzle streams:
are harder to handle.
absorb less heat.
have a lower discharge volume.
are more effective for hydraulic ventilation.
absorb less heat.
Generally speaking, a 1¾" (44-mm) attack hose can flow:
100 to 160 gpm (379 to 606 lpm).
120 to 180 gpm (454 to 681 lpm).
, Page 2 of 45
60 to 125 gpm (227 to 473 lpm).
75 to 150 gpm (284 to 566 lpm).
120 to 180 gpm (454 to 681 lpm).
Hose on an apparatus that has not been used should be unloaded, inspected,
and reloaded every:
6 months.
30 days.
year.
3 months.
30 days.
How does a doughnut hose roll differ from a straight hose roll?
Both couplings are on the outside.
The female coupling is on the outside.
The two couplings are connected.
Both couplings are in the middle
Both couplings are on the outside.
Master streams flow a minimum of:
350 gpm (1325 lpm).
500 gpm (1893 lpm).
450 gpm (1703 lpm).
400 gpm (1514 lpm).
350 gpm (1325 lpm).
The most likely cause of leaking between two joined couplings is a damaged
or missing:
expansion ring.
shank gasket.
, Page 3 of 45
swivel gasket.
compression gasket.
swivel gasket
A drag rescue device (DRD) is a component of the:
SCBA harness.
PASS device.
protective coat.
protective pants.
protective coat
A structural firefighting PPE ensemble includes which specific piece of
equipment?
Thermal imager
Portable radio
Safety harness
PASS device
PASS device
How much of the body is structural firefighting personal protective equipment
(PPE) designed to cover?
All but the wrists
All but the neck
Full body coverage
All but the ears
Full body coverage
PPE exposed to hazardous conditions should undergo an initial reduction of
contaminants __________.
after response personnel have thoroughly showered and changed clothing.
immediately upon returning to the station.
after apparatus and equipment have been restored to operational readiness.
, Page 4 of 45
at the scene before returning to the station.
at the scene before returning to the station.
Recent studies have identified which hazard related to the use of protective
hoods?
Transfer of carcinogens from the hood to the skin.
Increased physiological heat load.
Reduced ability of the wearer to detect ambient thermal hazards.
Greater frequency of SCBA facepiece seal leaks.
Transfer of carcinogens from the hood to the skin.
The multilayered or quilted layer of structural firefighting protective clothing is
the:
vapor barrier.
absorbent liner.
liner.
thermal barrier.
thermal barrier.
The outer shell of structural firefighting protective clothing is constructed of a
flame-resistant materials such as Nomex, Kevlar or _________?
Durex
PBI
Thermax
Treated cotton duck
PBI
The primary function of a fire helmet's __________ is intended to provide
thermal protection.
inner liner
Fire Fighter 1EXAM 2025 PRACTICE GRADED A+ QUESTIONS WITH CORRECT
ANSWERS 2025-2026 VERIFIED
When placed at the correct angle for climbing, the ratio of the ladder's vertical
reach to distance of the butt from the structure is _____ to one.
four
three
two
five
four
A soft sleeve hose is used to connect a pumper to a:
static water supply.
master stream device.
standpipe/FDC.
hydrant.
hydrant.
Compared to fog nozzle streams, smooth-bore nozzle streams:
are harder to handle.
absorb less heat.
have a lower discharge volume.
are more effective for hydraulic ventilation.
absorb less heat.
Generally speaking, a 1¾" (44-mm) attack hose can flow:
100 to 160 gpm (379 to 606 lpm).
120 to 180 gpm (454 to 681 lpm).
, Page 2 of 45
60 to 125 gpm (227 to 473 lpm).
75 to 150 gpm (284 to 566 lpm).
120 to 180 gpm (454 to 681 lpm).
Hose on an apparatus that has not been used should be unloaded, inspected,
and reloaded every:
6 months.
30 days.
year.
3 months.
30 days.
How does a doughnut hose roll differ from a straight hose roll?
Both couplings are on the outside.
The female coupling is on the outside.
The two couplings are connected.
Both couplings are in the middle
Both couplings are on the outside.
Master streams flow a minimum of:
350 gpm (1325 lpm).
500 gpm (1893 lpm).
450 gpm (1703 lpm).
400 gpm (1514 lpm).
350 gpm (1325 lpm).
The most likely cause of leaking between two joined couplings is a damaged
or missing:
expansion ring.
shank gasket.
, Page 3 of 45
swivel gasket.
compression gasket.
swivel gasket
A drag rescue device (DRD) is a component of the:
SCBA harness.
PASS device.
protective coat.
protective pants.
protective coat
A structural firefighting PPE ensemble includes which specific piece of
equipment?
Thermal imager
Portable radio
Safety harness
PASS device
PASS device
How much of the body is structural firefighting personal protective equipment
(PPE) designed to cover?
All but the wrists
All but the neck
Full body coverage
All but the ears
Full body coverage
PPE exposed to hazardous conditions should undergo an initial reduction of
contaminants __________.
after response personnel have thoroughly showered and changed clothing.
immediately upon returning to the station.
after apparatus and equipment have been restored to operational readiness.
, Page 4 of 45
at the scene before returning to the station.
at the scene before returning to the station.
Recent studies have identified which hazard related to the use of protective
hoods?
Transfer of carcinogens from the hood to the skin.
Increased physiological heat load.
Reduced ability of the wearer to detect ambient thermal hazards.
Greater frequency of SCBA facepiece seal leaks.
Transfer of carcinogens from the hood to the skin.
The multilayered or quilted layer of structural firefighting protective clothing is
the:
vapor barrier.
absorbent liner.
liner.
thermal barrier.
thermal barrier.
The outer shell of structural firefighting protective clothing is constructed of a
flame-resistant materials such as Nomex, Kevlar or _________?
Durex
PBI
Thermax
Treated cotton duck
PBI
The primary function of a fire helmet's __________ is intended to provide
thermal protection.
inner liner
