BICSI - Installer 1 EXAM STUDY GUIDE
QUESTIONS AND CORRECT ANSWERS
B - CORRECT ANSWERS A third 90-degree bend may be permitted in
a conduit run if the run does NOT exceed ______?
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
C - CORRECT ANSWERS Which of the following is a property of an
electromagnetic field built around a conductor that opposes any changes in
current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
A - CORRECT ANSWERS Which of the following markings is used for
non-conductive optical fiber general-purpose cables?
A OFNG
B OFCR
,C OFCP
D OFNP
A - CORRECT ANSWERS Which of the following refers to a set of
rules issued by a governmental body at the state level within the US?
A Regulations
B Best Practices
C Applications
D Guidelines
B - CORRECT ANSWERS What is the specified performance level for
Category 6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
,A - CORRECT ANSWERS Which type of optical fiber cable should be
color coded with an Orange outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
D - CORRECT ANSWERS Which of the following is the primary
benefit of using wall-mounted racks and cabinets in place of traditional
equipment racks?
A Provides equipment with a higher level of protection
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
C - CORRECT ANSWERS Which topology uses a linear configuration
that places all network devices on one length of cable?
A Star
, B Ring
C Bus
D - CORRECT ANSWERS Which of the Two organizations jointly
oversee the worldwide standardization of telecommunications cabling?
A Alliance for Telecommunications Industry Solutions (ATIS) and Society for
Cable Telecommunications Engineers (SCTE)
B National Electrical Contractors Association (NECA) and National Fire
Protection Association (NFPA)
C Comite Europeen de Normalisation Electrotechnique (CENELEC) and
Electronic Industries Association (EIA)
D International Organization for Standardization (ISO) and International
Electrotechnical Commission (IEC)
B - CORRECT ANSWERS Which of the following is designed to
provide protection from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
QUESTIONS AND CORRECT ANSWERS
B - CORRECT ANSWERS A third 90-degree bend may be permitted in
a conduit run if the run does NOT exceed ______?
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
C - CORRECT ANSWERS Which of the following is a property of an
electromagnetic field built around a conductor that opposes any changes in
current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
A - CORRECT ANSWERS Which of the following markings is used for
non-conductive optical fiber general-purpose cables?
A OFNG
B OFCR
,C OFCP
D OFNP
A - CORRECT ANSWERS Which of the following refers to a set of
rules issued by a governmental body at the state level within the US?
A Regulations
B Best Practices
C Applications
D Guidelines
B - CORRECT ANSWERS What is the specified performance level for
Category 6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
,A - CORRECT ANSWERS Which type of optical fiber cable should be
color coded with an Orange outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
D - CORRECT ANSWERS Which of the following is the primary
benefit of using wall-mounted racks and cabinets in place of traditional
equipment racks?
A Provides equipment with a higher level of protection
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
C - CORRECT ANSWERS Which topology uses a linear configuration
that places all network devices on one length of cable?
A Star
, B Ring
C Bus
D - CORRECT ANSWERS Which of the Two organizations jointly
oversee the worldwide standardization of telecommunications cabling?
A Alliance for Telecommunications Industry Solutions (ATIS) and Society for
Cable Telecommunications Engineers (SCTE)
B National Electrical Contractors Association (NECA) and National Fire
Protection Association (NFPA)
C Comite Europeen de Normalisation Electrotechnique (CENELEC) and
Electronic Industries Association (EIA)
D International Organization for Standardization (ISO) and International
Electrotechnical Commission (IEC)
B - CORRECT ANSWERS Which of the following is designed to
provide protection from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
