Bicsi Technician Exam ACTUAL QUESTIONS AND CORRECT ANSWERS

Bicsi Technician ExamACTUAL
QUESTIONS AND CORRECT ANSWERS
What network topology connects each device on the network to its neighbor
device until all devices are connected - CORRECT ANSWERS Hybird


When expanding an existing TR where the wall needs to be removed and has
active equipment and terminations attached the installer will need to -
CORRECT ANSWERS Float the wall or rack


What common cabinet configuration providing increased efficiency in heat
management is where - CORRECT ANSWERS The hot side of two
cabinet rows face each other


What are pulling sheafed used for? - CORRECT ANSWERS To assist in
the routing of the cable to the point where it will be pulled to the upper floors


What are the 2 types of EMT couplings used to connect sections together? -
CORRECT ANSWERS Compression and set screws


Using company property for business only, being punctual and maintaining
confidentiality are examples of____________ - CORRECT ANSWERS
Professionalism


Radiating cable standoffs supports should be installed a MINIMUM of
____________ below the cable tray - CORRECT ANSWERS 77mm
(3in)


If you are connecting a pul rope to optical fiber without a wire mesh or pulling
eye what should you connect to - CORRECT ANSWERS The aramid
yarn