Roadway Lighting 1: IMSA EXAM QUESTIONS AND ANSWERS GRADED A
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
1. The information within this study guide is intended to ______________ roadway
lighting systems and service.
a. reduce the cost of
b. highlight the importance of
c. further knowledge and understanding of
d. define specifications for: c.
2. The main purpose of lighting roadways and other transportation-related
facilities is to ______________.
a. provide an adequate visual environment for road users to safely use the road
system during hours of darkness
b.reduce crime
c. improve economy
d. provide light on residential properties: a.
3. It is the responsibility of those ____________ roadway lighting and electrical
systems to determine the applicable standards and codes which apply to the
given area, and incorporate the accordingly.
a. purchasing
b. operating
c. using
d. designing: d.
4. Regulations and standards for workers is defined by
a. the employer
b. the owner
c. the U.S. Department of Labor - Occupational Safety & Health Administration
(OSHA)
d. the National Electrical Code: c.
, Roadway Lighting 1: IMSA EXAM QUESTIONS AND ANSWERS GRADED A
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
5. The National Fire Protection Agency (NFPA) 70E - Standard for Electrical Safety
in the Workplace covers the full range of electrical safety issues, including
________.
a. safety related work practices
b. maintenance
c. special equipment requirements and installation
d. all of the above: d.
6. As worker safety regulations and standards will vary from one area to another,
it is the responsibility of the __________ to determine specific safety require-
ments for their area.
a. employer
b. regulatory agency
c. employee
d. a and c: d.
7. High visibility safety apparel _______________.
a. improves one's visibility to drivers thus reducing the risk of injury
b. should be worn at night only
c. is required only in major traffic volume areas
d. need only be worn in area where traffic speeds are over 30mph: a.
8. When working near electricity _____________ shall be used for protection
against electrical shock.
a. any rubber glove
b. common sense
c. purpose designed protective rubber insulating gloves
d. the National Electrical Code: c.
9. A worker should ________________ when working out of an aerial lift truck.
a. never wear a safety vest
, Roadway Lighting 1: IMSA EXAM QUESTIONS AND ANSWERS GRADED A
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
b. never wear a hardhat
c. only secure only themselves against falling
d. secure their tools against falling: d.
10. The person working on electrical systems should be _______________.
a. a qualified licensed electrician
b. anyone who has read NEC
c. someone with appropriate experience and training
d. a and c: d.
11. It is best to never get close than ________ from an overhead power line (under
50kV).
a. 5 ft
b. 8 ft
c. 10 ft
d. 1 ft: c.
12. If your vehicle makes contact with an energized line, remain inside until help
arrives. If you must get out due to fire, __________________.
a. jump our with your feet together, then shuffle away keeping both feet close
together.
b. get our anyway you can
c. you must make sure you contact the vehicle and ground for safe exit
d. don't, it is best to wait for fire department: a.
13. A worker can't safely enter an excavation ___________.
a. without approval for OSHA
b. unless approved shoring has been installed to prevent cave-in
c. without an approved safety harness
d. unless supervisor is present: b.
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
1. The information within this study guide is intended to ______________ roadway
lighting systems and service.
a. reduce the cost of
b. highlight the importance of
c. further knowledge and understanding of
d. define specifications for: c.
2. The main purpose of lighting roadways and other transportation-related
facilities is to ______________.
a. provide an adequate visual environment for road users to safely use the road
system during hours of darkness
b.reduce crime
c. improve economy
d. provide light on residential properties: a.
3. It is the responsibility of those ____________ roadway lighting and electrical
systems to determine the applicable standards and codes which apply to the
given area, and incorporate the accordingly.
a. purchasing
b. operating
c. using
d. designing: d.
4. Regulations and standards for workers is defined by
a. the employer
b. the owner
c. the U.S. Department of Labor - Occupational Safety & Health Administration
(OSHA)
d. the National Electrical Code: c.
, Roadway Lighting 1: IMSA EXAM QUESTIONS AND ANSWERS GRADED A
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
5. The National Fire Protection Agency (NFPA) 70E - Standard for Electrical Safety
in the Workplace covers the full range of electrical safety issues, including
________.
a. safety related work practices
b. maintenance
c. special equipment requirements and installation
d. all of the above: d.
6. As worker safety regulations and standards will vary from one area to another,
it is the responsibility of the __________ to determine specific safety require-
ments for their area.
a. employer
b. regulatory agency
c. employee
d. a and c: d.
7. High visibility safety apparel _______________.
a. improves one's visibility to drivers thus reducing the risk of injury
b. should be worn at night only
c. is required only in major traffic volume areas
d. need only be worn in area where traffic speeds are over 30mph: a.
8. When working near electricity _____________ shall be used for protection
against electrical shock.
a. any rubber glove
b. common sense
c. purpose designed protective rubber insulating gloves
d. the National Electrical Code: c.
9. A worker should ________________ when working out of an aerial lift truck.
a. never wear a safety vest
, Roadway Lighting 1: IMSA EXAM QUESTIONS AND ANSWERS GRADED A
ASSURED SUCCESS NEW UPDATE 2025/2026 (MULTIPLE CHOICES)
Study online at https://quizlet.com/_hhg5na
b. never wear a hardhat
c. only secure only themselves against falling
d. secure their tools against falling: d.
10. The person working on electrical systems should be _______________.
a. a qualified licensed electrician
b. anyone who has read NEC
c. someone with appropriate experience and training
d. a and c: d.
11. It is best to never get close than ________ from an overhead power line (under
50kV).
a. 5 ft
b. 8 ft
c. 10 ft
d. 1 ft: c.
12. If your vehicle makes contact with an energized line, remain inside until help
arrives. If you must get out due to fire, __________________.
a. jump our with your feet together, then shuffle away keeping both feet close
together.
b. get our anyway you can
c. you must make sure you contact the vehicle and ground for safe exit
d. don't, it is best to wait for fire department: a.
13. A worker can't safely enter an excavation ___________.
a. without approval for OSHA
b. unless approved shoring has been installed to prevent cave-in
c. without an approved safety harness
d. unless supervisor is present: b.
