UI UST INSTALLATION /RETROFITTING
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
1. To avoid undermining foundations of existing structures
excavation must be done - ANSWERS-A. Carefully
B. Tentatively
C. Quickly
D. Efficiently
Answer A
2. What is the determinant of the total depth of the tank
excavation. - ANSWERS-A. Tank diameter, bedding-
,thickness, hold-down pad(If required), depth of cover, and
slope and length of piping.
B. Slope and length of piping, depth of cover, hold down
pad(If required), thickness, amount of dirt
C. Thickness, hold-down pad(If required), depth of cover,
bedding, previous leaks or spills
D. Slope and length of piping, thickness, amount of dirt,
depth of cover, bedding, thickness.
Answer A
3. Much of a buried tanks support is derived from
__________ - ANSWERS-A. Compacted backfill
B. Chain-falls
C. Reinforced steal walls
D. Concrete
Answer A
,4. Storage systems discussed in this recommended practice
are usually regulated by - ANSWERS-Federal, state or local
agencies.
5. All owners should ensure that the equipment to be
installed meets - ANSWERS-applicable regulatory
requirements before being installed
6. Consult the local authorities who have jurisdiction in the
area before storage-system plans are - ANSWERS-finalized
or construction is initiated.
7. All owners should ensure that the equipment to be
installed meets all applicable regulatory requirements
before - ANSWERS-Being installed.
8. To avoid damage tanks must not be - ANSWERS-dropped,
dragged, or handled with sharp objects.
9. Tanks must not be dropped, dragged, or handled with
sharp objects to avoid - ANSWERS-Damage to the tank
, 10. The only time tanks really should be moved is when -
ANSWERS-for inspections and testing.
11. If a tanks is damaged at all throughout the moving
process it must be - ANSWERS-Repaired in accordance with
the manufacture's instructions.
12. The proper way to move a tank is by lifting it, using the -
ANSWERS-Lift lugs that are installed by the manufacturer.
13. Tanks should be carefully lifted and lowered using -
ANSWERS-Cables or chains of adequate length.
14. When two lifting lugs are being used, the angle between
the lifting cable and vertical should be no more than -
ANSWERS-30 degrees.
15. Stockpile piping materials and equipment in a
_____________ _________ on the job site - ANSWERS-
Secure area
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
1. To avoid undermining foundations of existing structures
excavation must be done - ANSWERS-A. Carefully
B. Tentatively
C. Quickly
D. Efficiently
Answer A
2. What is the determinant of the total depth of the tank
excavation. - ANSWERS-A. Tank diameter, bedding-
,thickness, hold-down pad(If required), depth of cover, and
slope and length of piping.
B. Slope and length of piping, depth of cover, hold down
pad(If required), thickness, amount of dirt
C. Thickness, hold-down pad(If required), depth of cover,
bedding, previous leaks or spills
D. Slope and length of piping, thickness, amount of dirt,
depth of cover, bedding, thickness.
Answer A
3. Much of a buried tanks support is derived from
__________ - ANSWERS-A. Compacted backfill
B. Chain-falls
C. Reinforced steal walls
D. Concrete
Answer A
,4. Storage systems discussed in this recommended practice
are usually regulated by - ANSWERS-Federal, state or local
agencies.
5. All owners should ensure that the equipment to be
installed meets - ANSWERS-applicable regulatory
requirements before being installed
6. Consult the local authorities who have jurisdiction in the
area before storage-system plans are - ANSWERS-finalized
or construction is initiated.
7. All owners should ensure that the equipment to be
installed meets all applicable regulatory requirements
before - ANSWERS-Being installed.
8. To avoid damage tanks must not be - ANSWERS-dropped,
dragged, or handled with sharp objects.
9. Tanks must not be dropped, dragged, or handled with
sharp objects to avoid - ANSWERS-Damage to the tank
, 10. The only time tanks really should be moved is when -
ANSWERS-for inspections and testing.
11. If a tanks is damaged at all throughout the moving
process it must be - ANSWERS-Repaired in accordance with
the manufacture's instructions.
12. The proper way to move a tank is by lifting it, using the -
ANSWERS-Lift lugs that are installed by the manufacturer.
13. Tanks should be carefully lifted and lowered using -
ANSWERS-Cables or chains of adequate length.
14. When two lifting lugs are being used, the angle between
the lifting cable and vertical should be no more than -
ANSWERS-30 degrees.
15. Stockpile piping materials and equipment in a
_____________ _________ on the job site - ANSWERS-
Secure area
