Fire and Smoke Restoration Exam Questions with 100% Correct Answer
Verified | Updated (Actual Exam) 2025\2026
1. Technicians should not decide they will be able to pretest
restore a damaged item until they have __________ the
item and communicated with the customer
2. The restoration company works for the property own- insurance carrier, insured
er, who is the primary customer. A secondary cus-
tomer is the __________ __________ when the property
owner is an __________
3. Smoke and soot particles are visual by-products of incomplete combustion
__________ __________.
4. Heat, fuel, and oxygen are the key elements required combustions
for __________.
5. The particle size range of combustion smoke particles .1 , 4
is _____, ______ microns.
6. The general categories into which all smoke residues sout
may be places are PAH (Polycyclic Aromatic Hydrocar-
bons) and __________.
7. Both PAH and soot particles have been reported to be carcinogenic
___________ to humans.
8. A very difficult smoke odor for technicians to over- heightened awareness
come is the __________ __________ odor, also called "psy-
chological" odor.
9. To remove high levels of protein odor from surfaces, wet cleaning
______ __________ is usually required for cleaning pro-
tein residues.
, Fire and Smoke Restoration Exam Questions with 100% Correct Answer
Verified | Updated (Actual Exam) 2025\2026
10. When burned, this material will provide a thick, heavy Synthetic
black smeary residue.
11. Factors to consider in determining the degree of pressure, temperature
smoke contamination throughout a structure are the
air _______ and ________ generated during combustion.
12. The severity of soot contamination increases with a lack, greater quantity
________ of oxygen and decreases when a _________
_______ of oxygen is present during the fire.
13. Some materials and surfaces naturally adsorb more Natural wicks
odors than others. The odor control industry refers to
them as "__________ _______"
14. During a fire, smoke can carry vaporized oils, which oily film
eventually settle to leave an _______ ______ on surfaces,
which is difficult to remove.
15. Lighter plastic surfaces subjected to higher temper- yellow
atures and soot have protentional to _________ irre-
versibly.
16. From a common sense perspective, safety on the job everyone
site is the responsibility of _______________.
17. Safety regulations require companies to prepare a equipment, training
hazardous chemical program, issue appropriate safe-
ty ___________ to employees, and provide them with
safety _________.
18. safety data , equipment
, Fire and Smoke Restoration Exam Questions with 100% Correct Answer
Verified | Updated (Actual Exam) 2025\2026
Restorers may obtain the most accurate informa-
tion about potential chemical safety from: ___________
sheets, labels, and ___________.
19. All restoration chemicals must be kept in properly labeled
__________ containers and secured on the job site.
20. Advise the chemically- sensitive customers to not be in, informed
______ the affected areas while work is being per-
formed and ask for their _____ consent of product use.
21. When working for a customer who is chemically sensitive
_________, there may be need for special air scrubbing,
cleaning agents and deodorizing agents.
22. When working in areas containing loose soot residue, HEPA, PPE
it is highly recommended that restorers use appropri-
ate _____ air scrubbers and don ______.
23. ___________ and ________ are two commonly found invis- Lead, Asbestos
ible safety hazards to be aware of within older struc-
tures.
24. ________ is a heavy metal that was commonly incorpo- Lead
rated into paint formulations.
25. ___________ was used in various building materials (sid- Asbestos
ing, roofing, flooring, adhesives) as an insulating and
fire-retarding material.
26. Toxic materials such as lead and asbestos are most Demolition
likely to be released from painted surfaces into the air
during sanding and _____________.
Verified | Updated (Actual Exam) 2025\2026
1. Technicians should not decide they will be able to pretest
restore a damaged item until they have __________ the
item and communicated with the customer
2. The restoration company works for the property own- insurance carrier, insured
er, who is the primary customer. A secondary cus-
tomer is the __________ __________ when the property
owner is an __________
3. Smoke and soot particles are visual by-products of incomplete combustion
__________ __________.
4. Heat, fuel, and oxygen are the key elements required combustions
for __________.
5. The particle size range of combustion smoke particles .1 , 4
is _____, ______ microns.
6. The general categories into which all smoke residues sout
may be places are PAH (Polycyclic Aromatic Hydrocar-
bons) and __________.
7. Both PAH and soot particles have been reported to be carcinogenic
___________ to humans.
8. A very difficult smoke odor for technicians to over- heightened awareness
come is the __________ __________ odor, also called "psy-
chological" odor.
9. To remove high levels of protein odor from surfaces, wet cleaning
______ __________ is usually required for cleaning pro-
tein residues.
, Fire and Smoke Restoration Exam Questions with 100% Correct Answer
Verified | Updated (Actual Exam) 2025\2026
10. When burned, this material will provide a thick, heavy Synthetic
black smeary residue.
11. Factors to consider in determining the degree of pressure, temperature
smoke contamination throughout a structure are the
air _______ and ________ generated during combustion.
12. The severity of soot contamination increases with a lack, greater quantity
________ of oxygen and decreases when a _________
_______ of oxygen is present during the fire.
13. Some materials and surfaces naturally adsorb more Natural wicks
odors than others. The odor control industry refers to
them as "__________ _______"
14. During a fire, smoke can carry vaporized oils, which oily film
eventually settle to leave an _______ ______ on surfaces,
which is difficult to remove.
15. Lighter plastic surfaces subjected to higher temper- yellow
atures and soot have protentional to _________ irre-
versibly.
16. From a common sense perspective, safety on the job everyone
site is the responsibility of _______________.
17. Safety regulations require companies to prepare a equipment, training
hazardous chemical program, issue appropriate safe-
ty ___________ to employees, and provide them with
safety _________.
18. safety data , equipment
, Fire and Smoke Restoration Exam Questions with 100% Correct Answer
Verified | Updated (Actual Exam) 2025\2026
Restorers may obtain the most accurate informa-
tion about potential chemical safety from: ___________
sheets, labels, and ___________.
19. All restoration chemicals must be kept in properly labeled
__________ containers and secured on the job site.
20. Advise the chemically- sensitive customers to not be in, informed
______ the affected areas while work is being per-
formed and ask for their _____ consent of product use.
21. When working for a customer who is chemically sensitive
_________, there may be need for special air scrubbing,
cleaning agents and deodorizing agents.
22. When working in areas containing loose soot residue, HEPA, PPE
it is highly recommended that restorers use appropri-
ate _____ air scrubbers and don ______.
23. ___________ and ________ are two commonly found invis- Lead, Asbestos
ible safety hazards to be aware of within older struc-
tures.
24. ________ is a heavy metal that was commonly incorpo- Lead
rated into paint formulations.
25. ___________ was used in various building materials (sid- Asbestos
ing, roofing, flooring, adhesives) as an insulating and
fire-retarding material.
26. Toxic materials such as lead and asbestos are most Demolition
likely to be released from painted surfaces into the air
during sanding and _____________.
