BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) R
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
1. If you inhale phenolic fumes what would happen to Trouble breathing
you?
2. A _________ fire extinguisher should be used on an Class C
electrical fire.
3. What does OSHA stand for? Occupational Safety & Health
Administration
4. This type of drawing represents a three-dimension- Orthographic
al object using several two-dimensional views of the
object.
5. What are linear dimensions usually expressed in? Decimal or Fractional Units
6. What does a filled triangle represent in a fluid power Hydraulic Flow
diagram?
7. What can happen if bolts and nuts are not properly They wear out quickly and can
torqued? cause failure.
8. What safety practice is used to prevent equipment Lockout/Tagout
from being energized?
9. A Safety Data Sheet (SDS) provides information Handling and Storage
about first aid measures, stability and reactivity, and
_____?
10. Which of the following is not true of a title block? Format is the same from com-
pany to company.
11. Electrical safety
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) R
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
A NFPA 70E is a regulation that provides guidelines
and details for ___________?
12. GFCI devices are used for what purpose? To prevent a person from be-
ing electrocuted.
13. A person with serious electrical injury should be They are in immediate danger
moved only when _______.
14. What must be provided by chemical manufacturers, Safety Data Sheet (SDS).
distributors, and importers to anyone who will work
with these potentially dangerous materials?
15. You come across a fellow employee who is being Shut off the circuit.
electrocuted by becoming attached to a live electri-
cal circuit, what is the first thing you should do?
16. What would slippery floors and cluttered walkways Physical hazards.
be considered in the workplace?
17. What tool is used to measure the turning force Torque Wrench
when tightening a fastener?
18. When working on an electrical, fluid power, or me- LOTO
chanical system a ____ procedure should be per-
formed to lock out the energy.
19. The section of a technical report which summarizes Abstract
the report's contents is called what?
20. What does a thick line represent in a schematic dia- Current flow
gram?
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) R
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
21. A switch is an example of a _____ into a motor control input
circuit.
22. How does the overload of a motor provide protec- It opens a normally closed
tion when current exceeds a predetermined value? contact.
23. Overload protection is designed to protect the Electric motor
______________ by disconnecting it from the power
source when an overload is sensed.
24. Motors are normally protected from overload by a thermal
_______ device.
25. T/F: A two-wire control for a motor will restart au- True
tomatically when power is restored after a power
failure.
26. What is the most common machine wire type? THHN
27. T/F: A three-wire controlled motor will restart au- False
tomatically after power is restored after a power
failure.
28. Jogging is a type of motor control in which what The motors rotation is moved
happens? (bumped) slightly.
29. A wire's current carrying limit is known as what? Ampacity
30. A motor _______ is a motor controller that includes Starter
overload protection.
31. Dual pole, Dual Throw
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
1. If you inhale phenolic fumes what would happen to Trouble breathing
you?
2. A _________ fire extinguisher should be used on an Class C
electrical fire.
3. What does OSHA stand for? Occupational Safety & Health
Administration
4. This type of drawing represents a three-dimension- Orthographic
al object using several two-dimensional views of the
object.
5. What are linear dimensions usually expressed in? Decimal or Fractional Units
6. What does a filled triangle represent in a fluid power Hydraulic Flow
diagram?
7. What can happen if bolts and nuts are not properly They wear out quickly and can
torqued? cause failure.
8. What safety practice is used to prevent equipment Lockout/Tagout
from being energized?
9. A Safety Data Sheet (SDS) provides information Handling and Storage
about first aid measures, stability and reactivity, and
_____?
10. Which of the following is not true of a title block? Format is the same from com-
pany to company.
11. Electrical safety
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) R
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
A NFPA 70E is a regulation that provides guidelines
and details for ___________?
12. GFCI devices are used for what purpose? To prevent a person from be-
ing electrocuted.
13. A person with serious electrical injury should be They are in immediate danger
moved only when _______.
14. What must be provided by chemical manufacturers, Safety Data Sheet (SDS).
distributors, and importers to anyone who will work
with these potentially dangerous materials?
15. You come across a fellow employee who is being Shut off the circuit.
electrocuted by becoming attached to a live electri-
cal circuit, what is the first thing you should do?
16. What would slippery floors and cluttered walkways Physical hazards.
be considered in the workplace?
17. What tool is used to measure the turning force Torque Wrench
when tightening a fastener?
18. When working on an electrical, fluid power, or me- LOTO
chanical system a ____ procedure should be per-
formed to lock out the energy.
19. The section of a technical report which summarizes Abstract
the report's contents is called what?
20. What does a thick line represent in a schematic dia- Current flow
gram?
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) R
view Exam 2025 (Actual Exam) Questions with verified Answers (Latest
Update 2025) UPDATE!!
21. A switch is an example of a _____ into a motor control input
circuit.
22. How does the overload of a motor provide protec- It opens a normally closed
tion when current exceeds a predetermined value? contact.
23. Overload protection is designed to protect the Electric motor
______________ by disconnecting it from the power
source when an overload is sensed.
24. Motors are normally protected from overload by a thermal
_______ device.
25. T/F: A two-wire control for a motor will restart au- True
tomatically when power is restored after a power
failure.
26. What is the most common machine wire type? THHN
27. T/F: A three-wire controlled motor will restart au- False
tomatically after power is restored after a power
failure.
28. Jogging is a type of motor control in which what The motors rotation is moved
happens? (bumped) slightly.
29. A wire's current carrying limit is known as what? Ampacity
30. A motor _______ is a motor controller that includes Starter
overload protection.
31. Dual pole, Dual Throw
