1|Page
VA HIC EXAM PREP WITH QUESTIONS AND
100% CORRECT ANSWERS|| LATEST AND
COMPLETE VERSION 2025-2026 WITH EXPERT
VERIFIED SOLUTIONS|| ASSURED PASS
Enter and proceed" is presented as a ________ on the raised touchable surface on a
function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line
c. Circle
In new buildings, thresholds at doorways should be no higher than ________.
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4"
a. 1/2"
The maximum knee clearance shall be permitted to extend _____ under an element
that is 9" above the floor.
,2|Page
a. 30"
b. 18"
c. 36"
d. 25"
d. 25"
In existing buildings and facilities, the turning space shall be a circular space with
a _____ minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch
a. 60-inch
The brightness of the elevator car landing sill, threshold platform and controls are
to be no less than _______ foot candles.
a. 15
b. 10
c. 54
d. 5
d. 5
,3|Page
The clear width of an exterior accessible route located within seating areas shall be
_____ minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches
c. 36 inches
In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32"
b. 34"
What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
, 4|Page
d. 1-1/2"
c. 1-1/4"
All hardware such as handles, locks, or any other operable parts shall be _____
minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20"
b. 34"
What is the minimum diameter of a circular turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50"
a. 67"
What components shall not be part of an accessible route
a. Elevators & Platform Lifts
VA HIC EXAM PREP WITH QUESTIONS AND
100% CORRECT ANSWERS|| LATEST AND
COMPLETE VERSION 2025-2026 WITH EXPERT
VERIFIED SOLUTIONS|| ASSURED PASS
Enter and proceed" is presented as a ________ on the raised touchable surface on a
function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line
c. Circle
In new buildings, thresholds at doorways should be no higher than ________.
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4"
a. 1/2"
The maximum knee clearance shall be permitted to extend _____ under an element
that is 9" above the floor.
,2|Page
a. 30"
b. 18"
c. 36"
d. 25"
d. 25"
In existing buildings and facilities, the turning space shall be a circular space with
a _____ minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch
a. 60-inch
The brightness of the elevator car landing sill, threshold platform and controls are
to be no less than _______ foot candles.
a. 15
b. 10
c. 54
d. 5
d. 5
,3|Page
The clear width of an exterior accessible route located within seating areas shall be
_____ minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches
c. 36 inches
In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32"
b. 34"
What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
, 4|Page
d. 1-1/2"
c. 1-1/4"
All hardware such as handles, locks, or any other operable parts shall be _____
minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20"
b. 34"
What is the minimum diameter of a circular turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50"
a. 67"
What components shall not be part of an accessible route
a. Elevators & Platform Lifts
