P-99 Low Pressure Boiler COF FDNY Newest 2025/2026 Questions And Correct Answers Verified For guaranteed pass |Latest update

P-99 Low Pressure Boiler COF FDNY Newest

2025/2026 Questions And Correct

Answers Verified For guaranteed pass |Latest update

For other than direct vent appliances, the vent termination

for a mechanical draft system shall be mounted a

minimum of _____ feet horizontally from an oil tank or gas

meter. - ANSWER-3




Vent piping for an oil tank shall terminate a minimum of

______ feet, measured vertically or horizontally, from any

building opening. - ANSWER-2




In low temperature hydronic piping, solder joints in a metal

pipe shall occur a minimum of _____ inches from any

, transition from the metal pipe to PE-AL-PE pressure pipe.

- ANSWER-18




Unless specified otherwise in the manufacturer's

installation instructions, the cross-sectional area of a

chimney flue connected to a solid-fuel-burning appliance

shall be a maximum of ____ times the area of the flue

collar. - ANSWER-3




Vent and chimney connectors shall have a minimum slope

of _____ rise per foot of run. - ANSWER-1/4 inch




The horizontal run of a listed vent connector to a natural

draft chimney shall be a maximum of _____ of the height