CA Crematory Manager's Test Correctly
Answered Questions | UpToDate |
Already Graded A+
What does the timer do?
➹➹➹: It shuts off either the primary burner, or afterburner at a preset time so that the
operator doesn't have to shut them off manually.
Name the 8 systems that have some kind of control, either by the operator or by an
automated programmer.
➹➹➹: 1) Electric Activated Door Control
2) Blower
3) Combustion Burner
4) Afterburner
5) Timer
6) Temperature Controller/Indicator
7) Chart Reorder
8) Opacity Monitor
What is the next step after the 7 start-up steps?
➹➹➹: Use a cardboard roller to insert case into primary chamber.
1|Page
,If repositioning is necessary, what body part is likely to need to be moved, and
to where?
➹➹➹: The trunk part of the torso or bone mass; to directly over the flame of the burner.
How cool should the primary chamber be before attempting removal of cremated
remains?
➹➹➹: Blow 400F
What are the two steps involved in processing cremated remains?
➹➹➹: 1) Removal of foreign objects
2) Reduction of particle size by grinding, crushing, pulverizing, etc to consistency
appropriate for disposition.
Name 7 types of foreign objects whose removal is consistent with processing.
➹➹➹: 1) Pacemakers
2) Prosthesis
3) Dental Gold
4) Jewelry
5) Mementos
6) Screw, nails, or staples
7) Casket hardware not previously removed.
6 step procedure for processing cremated remains
2|Page
, ➹➹➹: 1) Check processor for cleanliness
2) Remove foreign material from remains
3) Retrieve ID disc
4) Place remains in processor and process
5) Brush all residue into catch tray
6) Take tray and tag to packaging table
Minimum thickness of plastic bag inside urn.
➹➹➹: 2 mm
Where in urn should ID disc be placed?
➹➹➹: On plastic tie that closes bag inside.
What should be done if cremated remains do not fill urn completely?
➹➹➹: Fill the balance with clean shredded paper.
If urn lid is not completely secure, what should be sured to secure it?
➹➹➹: Nylon filament tape.
List eight layers of material for packaged cremated remains, from inside to outside.
➹➹➹: 1) Cremated remains
2) Plastic bag
3) Identification disc
3|Page
Answered Questions | UpToDate |
Already Graded A+
What does the timer do?
➹➹➹: It shuts off either the primary burner, or afterburner at a preset time so that the
operator doesn't have to shut them off manually.
Name the 8 systems that have some kind of control, either by the operator or by an
automated programmer.
➹➹➹: 1) Electric Activated Door Control
2) Blower
3) Combustion Burner
4) Afterburner
5) Timer
6) Temperature Controller/Indicator
7) Chart Reorder
8) Opacity Monitor
What is the next step after the 7 start-up steps?
➹➹➹: Use a cardboard roller to insert case into primary chamber.
1|Page
,If repositioning is necessary, what body part is likely to need to be moved, and
to where?
➹➹➹: The trunk part of the torso or bone mass; to directly over the flame of the burner.
How cool should the primary chamber be before attempting removal of cremated
remains?
➹➹➹: Blow 400F
What are the two steps involved in processing cremated remains?
➹➹➹: 1) Removal of foreign objects
2) Reduction of particle size by grinding, crushing, pulverizing, etc to consistency
appropriate for disposition.
Name 7 types of foreign objects whose removal is consistent with processing.
➹➹➹: 1) Pacemakers
2) Prosthesis
3) Dental Gold
4) Jewelry
5) Mementos
6) Screw, nails, or staples
7) Casket hardware not previously removed.
6 step procedure for processing cremated remains
2|Page
, ➹➹➹: 1) Check processor for cleanliness
2) Remove foreign material from remains
3) Retrieve ID disc
4) Place remains in processor and process
5) Brush all residue into catch tray
6) Take tray and tag to packaging table
Minimum thickness of plastic bag inside urn.
➹➹➹: 2 mm
Where in urn should ID disc be placed?
➹➹➹: On plastic tie that closes bag inside.
What should be done if cremated remains do not fill urn completely?
➹➹➹: Fill the balance with clean shredded paper.
If urn lid is not completely secure, what should be sured to secure it?
➹➹➹: Nylon filament tape.
List eight layers of material for packaged cremated remains, from inside to outside.
➹➹➹: 1) Cremated remains
2) Plastic bag
3) Identification disc
3|Page
