NFPA 10 Exam 2026 Questions and
Answers
Millimeter - Correct answer-1 in. = 25.4 mm
NFPA 32 - Correct answer-Standard for dry cleaning plants 2007
high pressure cylinders - Correct answer-Cylinders containing nitrogen,
compressed air, carbon dioxide or other gases at a pressure HIGHER then 500 psi
70 degrees F.
Low-Pressure cylinders - Correct answer-Cylinders filled with gas 500 psi or
LOWER @ 70 degrees F.
Extinguisher service pressure - Correct answer-Normal operating pressure as
indicated on the nameplate or cylinder of a fire extinguisher.
Factory test pressure - Correct answer-Pressure shown on the nameplate at which a
shell was tested at time of manufacture.
Wetting agent - Correct answer-When added to water, reduces surface tension and
increases its ability to penetrate and spread.
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
Answers
Millimeter - Correct answer-1 in. = 25.4 mm
NFPA 32 - Correct answer-Standard for dry cleaning plants 2007
high pressure cylinders - Correct answer-Cylinders containing nitrogen,
compressed air, carbon dioxide or other gases at a pressure HIGHER then 500 psi
70 degrees F.
Low-Pressure cylinders - Correct answer-Cylinders filled with gas 500 psi or
LOWER @ 70 degrees F.
Extinguisher service pressure - Correct answer-Normal operating pressure as
indicated on the nameplate or cylinder of a fire extinguisher.
Factory test pressure - Correct answer-Pressure shown on the nameplate at which a
shell was tested at time of manufacture.
Wetting agent - Correct answer-When added to water, reduces surface tension and
increases its ability to penetrate and spread.
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
