Fresenius PCT Exam Actual Exam Preparation
FRESENIUS PCT EXAM ACTUAL EXAM PREPARATION NEWEST
2025/2026 COMPLETE 200 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |BRAND NEW
VERSION!!
Which of the following is correct about KECN testing?
1. Sodium is used to estimate clearance of urea
2. The result of an OLC is know as KECN with accepted rate of 300-400
3. OLC tests are treated are 8 times per treatment
4. OLC are used to project serum levels - Correct Answer-Sodium is used to
estimate clearance of urea
Which is the following is true about dialysate?
1. It contains chlorine
2. It is ultrapure
3. It is sterile
4. It contains urea - Correct Answer-It is ultrapure
What does a yellow AMP light indicate? - Correct Answer-Projected spkt/v is less
than 1.4
Which of the following is true about Ultra Low Total Chlorine Testing? - Correct
Answer-the sample cup must be rinsed three times
1|Page
, Fresenius PCT Exam Actual Exam Preparation
What is the limit for Total Chlorine? - Correct Answer-< 0.1 ppm (parts per million)
What PPE should you wear when disinfecting a dialysis station or cleaning a blood
spill? - Correct Answer-gloves, gown and face shield
You should check both arms for a fistula or graft before taking what vital sign? -
Correct Answer-blood pressure
When should you replace the venous line during treatment?
a. If the arterial pressure goes to - 250
b. If a large clot is seen in the venous line
c. Should never be replaced during treatment
d. Venous pressure is half the BFR - Correct Answer-If a large clot is seen in the
venous line
Which should be reported to the RN? - Correct Answer-BP 165/102
Where in the circuit should you look to determine what the cause of an venous
alarm?
a. the dialyzer
b. the venous chamber to the venous needle
2|Page
, Fresenius PCT Exam Actual Exam Preparation
c. blood pump only
d. from the arterial needle to the blood bump - Correct Answer-the venous
chamber to the venous needle
After treatment, a patient's blood pressure has dropped from 135/90 to 94/68.
What should you do? - Correct Answer-notify RN
What must you do when leaving a dirty area and going to a clean area and get
supplies? - Correct Answer-remove gloves and perform hand hygiene
What is the safe range when testing for dialysate pH? - Correct Answer-6.9 - 7.6
Dialysate with high conductivity will cause ______. Dialysate with low conductivity
will cause _______. - Correct Answer-crenation, hemolysis
When is hand santizer okay to be used? - Correct Answer-after leaving patient
station
Where must hepatitis B positive patient be dialyzed? - Correct Answer-isolation
room
Where should be dialyze a hep B susceptible patient? - Correct Answer-Outside
the buffer zone AWAY from the isolation room
3|Page
, Fresenius PCT Exam Actual Exam Preparation
What concentration of bleach should be used to clean a blood spill to clean a
blood spill greater than 10 mL. - Correct Answer-1:10
Which of the following statements is correct about clamps?
a. clamps must be soaked in 1:100 bleach solution for 20 minutes
b. clamps can be used for 30 minutes at a time
c. clamps do not require a doctor's order
d. two clamps can be used if a patient cannot hold both sites - Correct Answer-
clamps must be soaked in 1:100 bleach solution for 20 minutes
Which of the following would keep KECN values stable during treatment:
a. missed heparin dose
b. BFR set as prescribed
c. clotting in dialyzer
d. poor arterial flow from the access - Correct Answer-BFR set as prescribed
What should you do with a sharps container in the event of a flood? - Correct
Answer-lock, seal and place them in a bio-hazard storage room
What type of access has the lowest complication rate? - Correct Answer-fistula
4|Page
FRESENIUS PCT EXAM ACTUAL EXAM PREPARATION NEWEST
2025/2026 COMPLETE 200 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |BRAND NEW
VERSION!!
Which of the following is correct about KECN testing?
1. Sodium is used to estimate clearance of urea
2. The result of an OLC is know as KECN with accepted rate of 300-400
3. OLC tests are treated are 8 times per treatment
4. OLC are used to project serum levels - Correct Answer-Sodium is used to
estimate clearance of urea
Which is the following is true about dialysate?
1. It contains chlorine
2. It is ultrapure
3. It is sterile
4. It contains urea - Correct Answer-It is ultrapure
What does a yellow AMP light indicate? - Correct Answer-Projected spkt/v is less
than 1.4
Which of the following is true about Ultra Low Total Chlorine Testing? - Correct
Answer-the sample cup must be rinsed three times
1|Page
, Fresenius PCT Exam Actual Exam Preparation
What is the limit for Total Chlorine? - Correct Answer-< 0.1 ppm (parts per million)
What PPE should you wear when disinfecting a dialysis station or cleaning a blood
spill? - Correct Answer-gloves, gown and face shield
You should check both arms for a fistula or graft before taking what vital sign? -
Correct Answer-blood pressure
When should you replace the venous line during treatment?
a. If the arterial pressure goes to - 250
b. If a large clot is seen in the venous line
c. Should never be replaced during treatment
d. Venous pressure is half the BFR - Correct Answer-If a large clot is seen in the
venous line
Which should be reported to the RN? - Correct Answer-BP 165/102
Where in the circuit should you look to determine what the cause of an venous
alarm?
a. the dialyzer
b. the venous chamber to the venous needle
2|Page
, Fresenius PCT Exam Actual Exam Preparation
c. blood pump only
d. from the arterial needle to the blood bump - Correct Answer-the venous
chamber to the venous needle
After treatment, a patient's blood pressure has dropped from 135/90 to 94/68.
What should you do? - Correct Answer-notify RN
What must you do when leaving a dirty area and going to a clean area and get
supplies? - Correct Answer-remove gloves and perform hand hygiene
What is the safe range when testing for dialysate pH? - Correct Answer-6.9 - 7.6
Dialysate with high conductivity will cause ______. Dialysate with low conductivity
will cause _______. - Correct Answer-crenation, hemolysis
When is hand santizer okay to be used? - Correct Answer-after leaving patient
station
Where must hepatitis B positive patient be dialyzed? - Correct Answer-isolation
room
Where should be dialyze a hep B susceptible patient? - Correct Answer-Outside
the buffer zone AWAY from the isolation room
3|Page
, Fresenius PCT Exam Actual Exam Preparation
What concentration of bleach should be used to clean a blood spill to clean a
blood spill greater than 10 mL. - Correct Answer-1:10
Which of the following statements is correct about clamps?
a. clamps must be soaked in 1:100 bleach solution for 20 minutes
b. clamps can be used for 30 minutes at a time
c. clamps do not require a doctor's order
d. two clamps can be used if a patient cannot hold both sites - Correct Answer-
clamps must be soaked in 1:100 bleach solution for 20 minutes
Which of the following would keep KECN values stable during treatment:
a. missed heparin dose
b. BFR set as prescribed
c. clotting in dialyzer
d. poor arterial flow from the access - Correct Answer-BFR set as prescribed
What should you do with a sharps container in the event of a flood? - Correct
Answer-lock, seal and place them in a bio-hazard storage room
What type of access has the lowest complication rate? - Correct Answer-fistula
4|Page
