UNION PACIFIC CONDUCTOR FINAL EXAM| ALL
QUESTIONS & CORRECT VERIFIED ANSWERS|
LATEST UPDATE 2025|26 GRADED A+
1. What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing ANSWER >> A. Block
2. What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons ANSWER >> B. Signal aspect
https://www.stuvia.com/user/MBOFFIN
, 3. According to rules hierarchy the system special instruction can be updated by
which of the following?
A. Service unit general order
B. General notice
C. System general order ANSWER >> C. System general order
4. What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal ANSWER >> C. Controlled signal
5. Your duties require you to cross through a train or a standing cut of cars. After
proper protection is provided and before crossing over from one side of the
equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
C. Both answers are correct. ANSWER >> C. Both answers are correct
https://www.stuvia.com/user/MBOFFIN
, 6. What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard ANSWER >> C. Yard
7. To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone ANSWER >> A. Breach
8. Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment ANSWER >>
A. Let go with both hands before your feet touch the ground or other support.
https://www.stuvia.com/user/MBOFFIN
, B. Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go. ANSWER >> B.Retain a grip with both hands on the
handhold until both feet are firmly placed on the ground or other support.
9. Employees must be careful to prevent injuring themselves or others. They
must be when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
https://www.stuvia.com/user/MBOFFIN
QUESTIONS & CORRECT VERIFIED ANSWERS|
LATEST UPDATE 2025|26 GRADED A+
1. What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track
C crossing ANSWER >> A. Block
2. What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons ANSWER >> B. Signal aspect
https://www.stuvia.com/user/MBOFFIN
, 3. According to rules hierarchy the system special instruction can be updated by
which of the following?
A. Service unit general order
B. General notice
C. System general order ANSWER >> C. System general order
4. What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal ANSWER >> C. Controlled signal
5. Your duties require you to cross through a train or a standing cut of cars. After
proper protection is provided and before crossing over from one side of the
equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover platform
and handholds (when available).
B. On equipment where crossover platforms and handholds are not available,
use end of car structural bracing to maintain 3-point contact, il sate to do so.
C. Both answers are correct. ANSWER >> C. Both answers are correct
https://www.stuvia.com/user/MBOFFIN
, 6. What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard ANSWER >> C. Yard
7. To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone ANSWER >> A. Breach
8. Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment ANSWER >>
A. Let go with both hands before your feet touch the ground or other support.
https://www.stuvia.com/user/MBOFFIN
, B. Retain a grip with both hands on the handhold until both feet are firmly
placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the other
foot on the ground before letting go. ANSWER >> B.Retain a grip with both hands on the
handhold until both feet are firmly placed on the ground or other support.
9. Employees must be careful to prevent injuring themselves or others. They
must be when performing their dutics and plan their work to avoid
injury.
A. Alert and Attentive
https://www.stuvia.com/user/MBOFFIN
