NICET Level 2 Exam / NICET Level 2 Exam Preparation/NICET Level 2 Exam Practice Exam With
Questions And Correct Answers| Brand New Version!
Job Site Posting - answer-1: OSHA Regulations
2: Department Of Labor Postings
3: Accident Prevention Postings
4: Safety Plan
5: Accident Reports
6: EEO Poster
7: Job Safety and Health Protection Plan
8: Criminal Code Notice
Inspector Responsibilities Do's - answer-1: Report to EIC
2: Record Measurement, complete reports, communicate quantities to contractor
3: Keep Track of Time and Attendance
4: Inspection Reports, Material Registers
Inspector Responsibilities Dont's - answer-1: Cannot Make subjective interpretations of plans
2: Cannot order work, including provided in construction documents
What grade Bar should be used for structures - answer-Grade 60
What coated bar should be used for concrete structures? - answer-Zinc or Epoxy coated
Types of Placement Machines - answer-1: Bucket Hoppers
2: Manuel, Motor Propelled
3: Chutes and Drop Chutes
4: Tremies
5: pumps
Where should concrete be placed on a slope - answer-At the bottom
How far should reinforcing steel be placed away from forms? - answer-3 inches
, Where should reinforcing steel tie wire be faced? - answer-Away from the finished surface
Pay Weight for Reinforcing Steel - answer-D² X L ÷ 162.198
How do you pay for Reinforcing Steel - answer-Weight of Bar x Linear foot of Bar
What is Type A Soil identification? - answer-compressive strength of 1.5 TSF per Sq FT
Clay: Plasticity Index 17% Cohesive <0.002
Clay Loam: Mixture of silt,sand and clay, 40,40,20
What is Type B soil Identification? - answer-Compressive strength of 0.5 TSF but less than 1.5TSF
Angular Gravel
Silt
Silt Loam
What is Type C soil Identification? - answer-Cohesive strength of 0.5TSF or Less
Gravel
Sand
Sand Loam
What is A-1 - answer-Stone Fragment
Gravel and Stone
What is A-2 - answer-Silty
Clay
Gravel Stone
What is A-3 - answer-Fine Sand
What is A-4, A-5 - answer-Silty Soils
What is A-6, A-7 - answer-Clay Soils
What is Clay Identification - answer-#200 Sieve
Fine grained soil, or fine graded portion of soil with index equal or greater than 4
Soil Identification Letters - answer-G= Gravel
Questions And Correct Answers| Brand New Version!
Job Site Posting - answer-1: OSHA Regulations
2: Department Of Labor Postings
3: Accident Prevention Postings
4: Safety Plan
5: Accident Reports
6: EEO Poster
7: Job Safety and Health Protection Plan
8: Criminal Code Notice
Inspector Responsibilities Do's - answer-1: Report to EIC
2: Record Measurement, complete reports, communicate quantities to contractor
3: Keep Track of Time and Attendance
4: Inspection Reports, Material Registers
Inspector Responsibilities Dont's - answer-1: Cannot Make subjective interpretations of plans
2: Cannot order work, including provided in construction documents
What grade Bar should be used for structures - answer-Grade 60
What coated bar should be used for concrete structures? - answer-Zinc or Epoxy coated
Types of Placement Machines - answer-1: Bucket Hoppers
2: Manuel, Motor Propelled
3: Chutes and Drop Chutes
4: Tremies
5: pumps
Where should concrete be placed on a slope - answer-At the bottom
How far should reinforcing steel be placed away from forms? - answer-3 inches
, Where should reinforcing steel tie wire be faced? - answer-Away from the finished surface
Pay Weight for Reinforcing Steel - answer-D² X L ÷ 162.198
How do you pay for Reinforcing Steel - answer-Weight of Bar x Linear foot of Bar
What is Type A Soil identification? - answer-compressive strength of 1.5 TSF per Sq FT
Clay: Plasticity Index 17% Cohesive <0.002
Clay Loam: Mixture of silt,sand and clay, 40,40,20
What is Type B soil Identification? - answer-Compressive strength of 0.5 TSF but less than 1.5TSF
Angular Gravel
Silt
Silt Loam
What is Type C soil Identification? - answer-Cohesive strength of 0.5TSF or Less
Gravel
Sand
Sand Loam
What is A-1 - answer-Stone Fragment
Gravel and Stone
What is A-2 - answer-Silty
Clay
Gravel Stone
What is A-3 - answer-Fine Sand
What is A-4, A-5 - answer-Silty Soils
What is A-6, A-7 - answer-Clay Soils
What is Clay Identification - answer-#200 Sieve
Fine grained soil, or fine graded portion of soil with index equal or greater than 4
Soil Identification Letters - answer-G= Gravel
