TEXAS STATE INSPECTOR SAFETY CERT.
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
A license plate lamp must be white in color and rejected for:
- ANSWERS-Mounting, Shoddy wiring, Lamp lens is broken
or does not fit properly(All of the above)
Mirrors would be rejected if: - ANSWERS-Reflecting surface
is cracked, peeled, or tarnished, mirror interferes with
driver's forward vision, mirror does not afford a clear view
to the rear(Any of the above)
What color tail lamps are required to pass inspection? -
ANSWERS-Red
, The wiper blade should be rejected if the portion of the
rubber element that contacts the windshield is torn on one
end or both ends combined, more than - ANSWERS-1 inch
A tailpipe failing to discharge exhaust from the rear, sides,
or top of the passenger compartment of the vehicle would
pass inspection(T/F) - ANSWERS-False
When performing a road test on the service brakes, a truck
weighing over 10,000 lbs GVW (this would include larger
trucks but not truck-trailer combinations) should be driven
at a speed of 20 mph and should stop within: - ANSWERS-40
feet
The vehicle owner/operator should be present when the
inspector is checking CNG tank located in the trunk of the
car. - ANSWERS-True
One of the required procedures in the inspection of the
steering is: - ANSWERS-Turning the steering wheel from full
left to full right
Conventional brakes or non-power brakes must have a
minimum pedal reserve of: - ANSWERS-2 inch
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
A license plate lamp must be white in color and rejected for:
- ANSWERS-Mounting, Shoddy wiring, Lamp lens is broken
or does not fit properly(All of the above)
Mirrors would be rejected if: - ANSWERS-Reflecting surface
is cracked, peeled, or tarnished, mirror interferes with
driver's forward vision, mirror does not afford a clear view
to the rear(Any of the above)
What color tail lamps are required to pass inspection? -
ANSWERS-Red
, The wiper blade should be rejected if the portion of the
rubber element that contacts the windshield is torn on one
end or both ends combined, more than - ANSWERS-1 inch
A tailpipe failing to discharge exhaust from the rear, sides,
or top of the passenger compartment of the vehicle would
pass inspection(T/F) - ANSWERS-False
When performing a road test on the service brakes, a truck
weighing over 10,000 lbs GVW (this would include larger
trucks but not truck-trailer combinations) should be driven
at a speed of 20 mph and should stop within: - ANSWERS-40
feet
The vehicle owner/operator should be present when the
inspector is checking CNG tank located in the trunk of the
car. - ANSWERS-True
One of the required procedures in the inspection of the
steering is: - ANSWERS-Turning the steering wheel from full
left to full right
Conventional brakes or non-power brakes must have a
minimum pedal reserve of: - ANSWERS-2 inch
