GEORGIA Backflow Prevention Assembly Tester Practice 2025/2026Exam With Verified Questions And Detailed Correct Answers.

GEORGIA Backflow Prevention Assembly Tester

Practice 2025/2026Exam With Verified Questions And

Detailed Correct Answers.




Water hauling truck fill stations should have either an air-

gap separation or a(n) _____?

A. Atmospheric vacuum breaker

B. Double check valve assembly

C. Dual check valve

D. Pressure vacuum breaker assembly

E. Reduced pressure principle assembly - ANSWER-

Reduced pressure principle assembly

,When testing a reduced pressure principle assembly using

three hoses, a difference between the apparent and actual

reading is likely due to _____?

A. Backflow

B. Check valve failure

C. Disc compression

D. A leaking shut-off valve

E. Opening of the bypass control valve - ANSWER-A

leaking shut-off valve




The plumbing code requires that a spill-resistant vacuum

breaker be installed above the highest use by at least

_____?

A. 3 in. (7.6 cm)

,B. 6 in. (15 cm)

C. 9 in. (23 cm)

D. 12 in (30 cm)

E. 18 in. (46 cm) - ANSWER-12 in (30 cm)




Modifications of any kind to a backflow preventer will

_____?

A. Alter its head loss

B. Render it inoperable

C. Require a tester failure

D. Validate its warranty

E. Void its approval - ANSWER-Void its approval

, A water system pressure of 10 psi (69 kPa) and a

plumbing system pressure of 20 psi (138 kPa) may be

described as _____?

A. Backpressure

B. Backsiphonage

C. Gauge pressure differential

D. inflow/infiltration

E. Static condition - ANSWER-Backpressure




According to ANSI standard, potable water pipe marking

requirements are _____ lettering.

A. Blue background with white

B. Green background with white

C. Green background with yellow