RI OPERATOR ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
If two or more valves are The valve with the least resistance.
opened at the same time,
through which valve will the
oil flow?
What is the fastest way to Practice and constant striving for smoothness.
learn and gain complete
control of the backhoes
hydraulics?
The advantages of the two True.
lever system
include less operator fatigue
and increased control when
using all four functions at
once.
,The four level system gives True
the operator
slightly greater control
when propelling or
maneuvering the machine
with the backhoe itself.
The "floating the bucket" False - One inch
exercise involves following
the contour of the ground
with the bucket one foot off
the surface of the ground.
A machine with improperly True
functioning or misadjusted
brakes should be
removed
from service and repaired.
All TLBs respond the same False - TLBs respond in their own way to operator input.
way to operator input.
The mechanical response to Different
TLBs can vary greatly. manufacturers
Machine response can Age of the
differ due to: machine
Weight distribution of the machine
Weight distribution and the False. Weight distribution and the center of gravity
center of differs from one machine to another
gravity stays the same from
one machine to another
An older machine should true
be operated in a more
gentle way to avoid over-
stressing its individual
parts
In what steering 2WD
configuration can the
operator use the breaks to
steer and control the
machine
, Broken or
The machines response in
missing parts
older machines can be
Poor or worn
degraded by:
brakes Weaker
hydraulic power
Steer the
The independent brakes of a
machine
2WD TLB can be used to:
Control the
machine Stop
the machine
Proper response and equal True
adjustment of independent
brake systems is critical to
safe operation
When the engine is idling, Produces low power and low speed.
the hydraulic system:
The hand throttle is False - The hand throttle is commonly used during backhoe
commonly used during operations.
loader operations.
In tight working conditions, or True.
where
utilities may be in the
area, the operator should
lower the RPMs of the
engine for slower speed
and more precise control
over the machine.
Because of the technical True
skills required for loading
and unloading a TLB onto
a
transporter, only
experienced operators
should carry out the task.
, If you ever find a True.
mechanical problem on
any machine that could
compromise safety, notify
your supervisor
immediately, and take
necessary action to maintain
safety at all times.
What is the number one Getting on and off the machine.
cause of accidents with the
TLB?
You turn the TLB off at the False - The operator must do a pre-operation check of the
end of the working day and machine.
everything is okay; it is
alright to start the machine
up the next day and start
working.
Reverse warning
What safety devices should alarm Seat belt
you check? Guards
When must you wear your All of the time.
seat belt?
When loading a machine Firm and level.
onto a truck or trailer, the
ground conditions should be:
When loading the Lowered
machine, make sure
buckets, blades, forks, and
other mounted equipment
are:
Lower and secure buckets, booms, and
Following loading you must: all other equipment. Shut off the engine
and remove the key.
Place transmission in park or low and apply brake.
When securing the TLB to True
the transporting vehicle
with cables or chains, be
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
If two or more valves are The valve with the least resistance.
opened at the same time,
through which valve will the
oil flow?
What is the fastest way to Practice and constant striving for smoothness.
learn and gain complete
control of the backhoes
hydraulics?
The advantages of the two True.
lever system
include less operator fatigue
and increased control when
using all four functions at
once.
,The four level system gives True
the operator
slightly greater control
when propelling or
maneuvering the machine
with the backhoe itself.
The "floating the bucket" False - One inch
exercise involves following
the contour of the ground
with the bucket one foot off
the surface of the ground.
A machine with improperly True
functioning or misadjusted
brakes should be
removed
from service and repaired.
All TLBs respond the same False - TLBs respond in their own way to operator input.
way to operator input.
The mechanical response to Different
TLBs can vary greatly. manufacturers
Machine response can Age of the
differ due to: machine
Weight distribution of the machine
Weight distribution and the False. Weight distribution and the center of gravity
center of differs from one machine to another
gravity stays the same from
one machine to another
An older machine should true
be operated in a more
gentle way to avoid over-
stressing its individual
parts
In what steering 2WD
configuration can the
operator use the breaks to
steer and control the
machine
, Broken or
The machines response in
missing parts
older machines can be
Poor or worn
degraded by:
brakes Weaker
hydraulic power
Steer the
The independent brakes of a
machine
2WD TLB can be used to:
Control the
machine Stop
the machine
Proper response and equal True
adjustment of independent
brake systems is critical to
safe operation
When the engine is idling, Produces low power and low speed.
the hydraulic system:
The hand throttle is False - The hand throttle is commonly used during backhoe
commonly used during operations.
loader operations.
In tight working conditions, or True.
where
utilities may be in the
area, the operator should
lower the RPMs of the
engine for slower speed
and more precise control
over the machine.
Because of the technical True
skills required for loading
and unloading a TLB onto
a
transporter, only
experienced operators
should carry out the task.
, If you ever find a True.
mechanical problem on
any machine that could
compromise safety, notify
your supervisor
immediately, and take
necessary action to maintain
safety at all times.
What is the number one Getting on and off the machine.
cause of accidents with the
TLB?
You turn the TLB off at the False - The operator must do a pre-operation check of the
end of the working day and machine.
everything is okay; it is
alright to start the machine
up the next day and start
working.
Reverse warning
What safety devices should alarm Seat belt
you check? Guards
When must you wear your All of the time.
seat belt?
When loading a machine Firm and level.
onto a truck or trailer, the
ground conditions should be:
When loading the Lowered
machine, make sure
buckets, blades, forks, and
other mounted equipment
are:
Lower and secure buckets, booms, and
Following loading you must: all other equipment. Shut off the engine
and remove the key.
Place transmission in park or low and apply brake.
When securing the TLB to True
the transporting vehicle
with cables or chains, be
