DRIVER OPERATOR MOBILE WATER SUPPLY EXAM ACTUAL 2025/2026 QUESTIONS AND 100% CORRECT ANSWERS

DRIVER OPERATOR MOBILE WATER SUPPLY EXAM ACTUAL 2025/2026 QUESTIONS AND 100% CORRECT ANSWERS Identify FIVE requirements for a MWS apparatus that can be found in NFPA 1901 - Answer -1. An MWS apparatus equipped with a fire pump must have a tank to pump line at least two inches in diameter and be capable of supplying the pump with 500 GPM until at least 80% of the tank is emptied. 2. An MWS apparatus must be equipped with at least one external fill connection connected into the tank that allows the tank to be filled at a minimum rate of 1000 GPM. 3. The external fill connection should be equipped with a valve, strainer, and a 30 degree elbow. 4.Valves that are three inches or larger must be of the slow closing design.5. An MWS apparatus must have at least three large tank discharges capable of discharging 90% of the tank volume at an average of 1000 GPM. When Checking the left front or right front side of the fire apparatus, don't forget to inspect the: - Answer -saddle tanks Daily inspection - Answer -Ensure auxiliary fuel tank is full Operate pump primer Inspect auxiliary winterization system. Weekly Inspection - Answer -Clean intake strainers Pre-service pump certification test are conducted by: - Answer -An independent testing agency When using a static body of water as your water source during fire apparatus service testing, the water surface must not be more than___ feet above the centerline of the pump intake and the water must be at least _____ feet deep. - Answer -10 Feet above 4 Feet deep If the engine speed check proves the MWS apparatus is running at a different speed than what which it was originally rated, you need to? - Answer -Stop the testing until the problem is corrected.A year has passed and its time conduct the annual vacuum test on