1
MA 2A HOISTING EXAM EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+ 2025 –
2026
What is the purpose of the 520:C.M.R.6:00 - (ANSWER)To establish rules and
regulations for safety of the public
What regulatory authority governs hoisting machinery - (ANSWER)520-C.M.R.
6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit -
(ANSWER)Lock out tag out
In event of death, department of public safety must how soon - (ANSWER)Within
1 hour of incident
When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety -
(ANSWER)Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what - (ANSWER)American society of mechanical engineering
(ASME)
, 2
What items should be checked on daily inspection - (ANSWER)Wire ropes,
bearings, gears, friction clutches, brakes, chain drives and anything subject to
wear
What type of protection should be given to the operator of material handling and
moving equipment - (ANSWER)Protection from weather, heat in winter, safety
glasses, hard hat, roll over protective system
What equipment requires hoisting license - (ANSWER)Height of lift exceed 10' or
weight of load exceed 500 lbs or the capacity of the bucket is more than 1/4 cubic
yard
What is the minimum absolute limit of approach of power lines when operating
equipment - (ANSWER)125,000 volts = 10'
250,000 volts = 15'
250,000 volts or more = 25'
How do you test the load brakes - (ANSWER)Pick test, lift load about 1', hold it for
one minute
How should you approach and load any vehicle - (ANSWER)Approach any vehicle
to the side slow and square
How should you carry a load - (ANSWER)Carry and load 12-18" off the ground
MA 2A HOISTING EXAM EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+ 2025 –
2026
What is the purpose of the 520:C.M.R.6:00 - (ANSWER)To establish rules and
regulations for safety of the public
What regulatory authority governs hoisting machinery - (ANSWER)520-C.M.R.
6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit -
(ANSWER)Lock out tag out
In event of death, department of public safety must how soon - (ANSWER)Within
1 hour of incident
When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety -
(ANSWER)Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what - (ANSWER)American society of mechanical engineering
(ASME)
, 2
What items should be checked on daily inspection - (ANSWER)Wire ropes,
bearings, gears, friction clutches, brakes, chain drives and anything subject to
wear
What type of protection should be given to the operator of material handling and
moving equipment - (ANSWER)Protection from weather, heat in winter, safety
glasses, hard hat, roll over protective system
What equipment requires hoisting license - (ANSWER)Height of lift exceed 10' or
weight of load exceed 500 lbs or the capacity of the bucket is more than 1/4 cubic
yard
What is the minimum absolute limit of approach of power lines when operating
equipment - (ANSWER)125,000 volts = 10'
250,000 volts = 15'
250,000 volts or more = 25'
How do you test the load brakes - (ANSWER)Pick test, lift load about 1', hold it for
one minute
How should you approach and load any vehicle - (ANSWER)Approach any vehicle
to the side slow and square
How should you carry a load - (ANSWER)Carry and load 12-18" off the ground
