NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
NCCER CORE MODULE 1-5 EXAM NEWEST ACTUAL EXAM
COMPLETE 200 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
Module 1
A system that protects workers from the release of hazardous energy
while they work with machines and
equipment is referred to as _____. - Correct Answer-Lock-out/ Tag-out
In a lockout/tagout situation, a personal lock and tag must be removed
by _____. - Correct Answer-Person who applied them
Hard hats should be made of fiberglass or _____. - Correct Answer-
Reinforced plastic
A good general rule about hearing protection is that it should be used if
you must raise your voice for
someone to hear you when they are _____. - Correct Answer-2 feet
away
When there is the potential to be exposed to asbestos, workers must
_____. - Correct Answer-avoid disturbing it and contact your supervisor
1|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
The respirator that would be used where dust or solid particles might
be inhaled is a _____. - Correct Answer-half mask or mouth piece with a
mechanical filter
One source of lead on some job sites is _____. - Correct Answer-Paint
Hepatitis can be caused by contact with _____. - Correct Answer-Blood
One of the symptoms of heat stroke is _____. - Correct Answer-
Extremely high body temperature
When other workers are working near a welding operation, the
standard practice is to _____. - Correct Answer-Screen the work area
with welding shields
What type of fire extinguisher would be used on an electric motor that
has overheated and caught fire? - Correct Answer-Class C
The type of permit that must be issued before a permit-required
confined space can be accessed is called a(n)
_____. - Correct Answer-entry permit
2|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
Companies with strong safety cultures usually have lower? - Correct
Answer-Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts
are examples of - Correct Answer-unsafe conditions
The activity that consists of breaking a job into its component tasks and
then analyzing each step for
potential hazards is called a _____. - Correct Answer-Job Safety Analysis
A measure of the probability, consequences, and exposure related to an
event is referred to as _____. - Correct Answer-Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to _____. - Correct Answer-Cover and
mark it
The D-ring or support point on a safety harness should be placed _____.
- Correct Answer-Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. -
Correct Answer-Competent person
3|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
Lanyards that have no shock-absorbing features are used for _____. -
Correct Answer-Positioning
When placing a ladder against a platform or roof, the top of the ladder
should extend above the point where
the ladder touches the platform or roof by at least _____. - Correct
Answer-3 Feet
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects
from falling and striking a person below? - Correct Answer-toe boards,
debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials
beyond a _____. - Correct Answer-4:1 Ratio
Benching systems are prohibited in _____. - Correct Answer-Type C
In the absence of other information, all soil in an excavation should be
treated as if it is _____. - Correct Answer-Type C
Daily inspection of an excavation must be performed by a(n) _____. -
Correct Answer-Competent person
4|Page
NCCER CORE MODULE 1-5 EXAM NEWEST ACTUAL EXAM
COMPLETE 200 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
Module 1
A system that protects workers from the release of hazardous energy
while they work with machines and
equipment is referred to as _____. - Correct Answer-Lock-out/ Tag-out
In a lockout/tagout situation, a personal lock and tag must be removed
by _____. - Correct Answer-Person who applied them
Hard hats should be made of fiberglass or _____. - Correct Answer-
Reinforced plastic
A good general rule about hearing protection is that it should be used if
you must raise your voice for
someone to hear you when they are _____. - Correct Answer-2 feet
away
When there is the potential to be exposed to asbestos, workers must
_____. - Correct Answer-avoid disturbing it and contact your supervisor
1|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
The respirator that would be used where dust or solid particles might
be inhaled is a _____. - Correct Answer-half mask or mouth piece with a
mechanical filter
One source of lead on some job sites is _____. - Correct Answer-Paint
Hepatitis can be caused by contact with _____. - Correct Answer-Blood
One of the symptoms of heat stroke is _____. - Correct Answer-
Extremely high body temperature
When other workers are working near a welding operation, the
standard practice is to _____. - Correct Answer-Screen the work area
with welding shields
What type of fire extinguisher would be used on an electric motor that
has overheated and caught fire? - Correct Answer-Class C
The type of permit that must be issued before a permit-required
confined space can be accessed is called a(n)
_____. - Correct Answer-entry permit
2|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
Companies with strong safety cultures usually have lower? - Correct
Answer-Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts
are examples of - Correct Answer-unsafe conditions
The activity that consists of breaking a job into its component tasks and
then analyzing each step for
potential hazards is called a _____. - Correct Answer-Job Safety Analysis
A measure of the probability, consequences, and exposure related to an
event is referred to as _____. - Correct Answer-Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to _____. - Correct Answer-Cover and
mark it
The D-ring or support point on a safety harness should be placed _____.
- Correct Answer-Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. -
Correct Answer-Competent person
3|Page
, NCCER Core Module 1-5 EXAM NEWEST ACTUAL EXAM
Lanyards that have no shock-absorbing features are used for _____. -
Correct Answer-Positioning
When placing a ladder against a platform or roof, the top of the ladder
should extend above the point where
the ladder touches the platform or roof by at least _____. - Correct
Answer-3 Feet
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects
from falling and striking a person below? - Correct Answer-toe boards,
debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials
beyond a _____. - Correct Answer-4:1 Ratio
Benching systems are prohibited in _____. - Correct Answer-Type C
In the absence of other information, all soil in an excavation should be
treated as if it is _____. - Correct Answer-Type C
Daily inspection of an excavation must be performed by a(n) _____. -
Correct Answer-Competent person
4|Page
