,Chemical Engineering Process
Simulation
,Chemical Engineering
Process Simulation
Second Edition
Edited by
Dominic C. Y. Foo
Department of Chemical and Environmental Engineering/Centre of
Excellence for Green Technologies, University of Nottingham Malaysia,
Semenyih, Selangor, Malaysia
, Elsevier
Radarweg 29, PO Box 211, 1000 AE Amsterdam, Netherlands
The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, United Kingdom
50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States
Copyright Ó 2023 Elsevier Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or any information storage
and retrieval system, without permission in writing from the publisher. Details on how to
seek permission, further information about the Publisher’s permissions policies and our
arrangements with organizations such as the Copyright Clearance Center and the Copyright
Licensing Agency, can be found at our website: www.elsevier.com/permissions.
This book and the individual contributions contained in it are protected under copyright by
the Publisher (other than as may be noted herein).
Notices
Knowledge and best practice in this field are constantly changing. As new research and
experience broaden our understanding, changes in research methods, professional prac-
tices, or medical treatment may become necessary.
Practitioners and researchers must always rely on their own experience and knowledge in
evaluating and using any information, methods, compounds, or experiments described
herein. In using such information or methods they should be mindful of their own safety
and the safety of others, including parties for whom they have a professional responsibility.
To the fullest extent of the law, neither the Publisher nor the authors, contributors, or
editors, assume any liability for any injury and/or damage to persons or property as a matter
of products liability, negligence or otherwise, or from any use or operation of any methods,
products, instructions, or ideas contained in the material herein.
ISBN: 978-0-323-90168-0
For information on all Elsevier publications visit our website at
https://www.elsevier.com/books-and-journals
Publisher: Susan Dennis
Acquisitions Editor: Anita Koch
Editorial Project Manager: Judith Clarisse Punzalan
Production Project Manager: Paul Prasad Chandramohan
Cover Designer: Vicky Pearson Esser
Typeset by TNQ Technologies
Simulation
,Chemical Engineering
Process Simulation
Second Edition
Edited by
Dominic C. Y. Foo
Department of Chemical and Environmental Engineering/Centre of
Excellence for Green Technologies, University of Nottingham Malaysia,
Semenyih, Selangor, Malaysia
, Elsevier
Radarweg 29, PO Box 211, 1000 AE Amsterdam, Netherlands
The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, United Kingdom
50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States
Copyright Ó 2023 Elsevier Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or any information storage
and retrieval system, without permission in writing from the publisher. Details on how to
seek permission, further information about the Publisher’s permissions policies and our
arrangements with organizations such as the Copyright Clearance Center and the Copyright
Licensing Agency, can be found at our website: www.elsevier.com/permissions.
This book and the individual contributions contained in it are protected under copyright by
the Publisher (other than as may be noted herein).
Notices
Knowledge and best practice in this field are constantly changing. As new research and
experience broaden our understanding, changes in research methods, professional prac-
tices, or medical treatment may become necessary.
Practitioners and researchers must always rely on their own experience and knowledge in
evaluating and using any information, methods, compounds, or experiments described
herein. In using such information or methods they should be mindful of their own safety
and the safety of others, including parties for whom they have a professional responsibility.
To the fullest extent of the law, neither the Publisher nor the authors, contributors, or
editors, assume any liability for any injury and/or damage to persons or property as a matter
of products liability, negligence or otherwise, or from any use or operation of any methods,
products, instructions, or ideas contained in the material herein.
ISBN: 978-0-323-90168-0
For information on all Elsevier publications visit our website at
https://www.elsevier.com/books-and-journals
Publisher: Susan Dennis
Acquisitions Editor: Anita Koch
Editorial Project Manager: Judith Clarisse Punzalan
Production Project Manager: Paul Prasad Chandramohan
Cover Designer: Vicky Pearson Esser
Typeset by TNQ Technologies
