CSLB C-13 Fencing Exam (TRADE) NEWEST EXAM 2025-2026 |
COMPLETE QUESTIONS AND CORRECT ANSWERS | GRADED A+ |
LATEST EXAM | VERIFIED ANSWERS
Terms in this set (70)
According to ASTM D all of the above
specifications, all
exposed ends of tubular
posts should be fitted with
caps of:
A aluminum alloy
B formed steel
C malleable or cast iron
D all of the above
Gate latches must be made D any of the above
of which if the following?
A steel
B malleable iron
C aluminum alloy
D any of the above
Which type of hinge should C bolt and strap
be used to fasten a hinge to
a wood gate posts if the
bolt is to go through the
post?
A butt hinge
B lag and strap
C bolt and strap
,D strap hinge
Which of the following posts C line posts
may be driven?
A pull posts
B round posts
C line posts
D corner posts
What shape nut (besides C hexagonal
squares) is used with
machine screws?
A octagonal
B round
C hexagonal B oblong
If a job required 400 linear C 20
feet of (chain link) fabric, (400 ft. of top rail divided by 21 = 19 pieces + 1 extra = 20 pieces
and 400 feet of top rail, how
many pieces will be
needed if top rail comes
in 21-foot lengths?
A 19
B 17
C 20
D 22
The easiest joint to use is the C lap
___ joint.
A butt
B overlap
C lap
D none of the above
, If a fence section pulls C fence should be cut back and new posts installed next to the
loose from its anchor rod wall
in a block wall, the ___.
A rod should be cut and a
new one welded in place
B rod should be cut and
new rod drilled into the
wall
C fence should be cut
back and a new posts
installed next to the
wall
D none of the above
Sheet steel is cut with a ___ C a shear, power break
and bent into the desired
shape with ___.
A torch, pliers
B a shear, shaper
C a shear, power break
D none of the above
COMPLETE QUESTIONS AND CORRECT ANSWERS | GRADED A+ |
LATEST EXAM | VERIFIED ANSWERS
Terms in this set (70)
According to ASTM D all of the above
specifications, all
exposed ends of tubular
posts should be fitted with
caps of:
A aluminum alloy
B formed steel
C malleable or cast iron
D all of the above
Gate latches must be made D any of the above
of which if the following?
A steel
B malleable iron
C aluminum alloy
D any of the above
Which type of hinge should C bolt and strap
be used to fasten a hinge to
a wood gate posts if the
bolt is to go through the
post?
A butt hinge
B lag and strap
C bolt and strap
,D strap hinge
Which of the following posts C line posts
may be driven?
A pull posts
B round posts
C line posts
D corner posts
What shape nut (besides C hexagonal
squares) is used with
machine screws?
A octagonal
B round
C hexagonal B oblong
If a job required 400 linear C 20
feet of (chain link) fabric, (400 ft. of top rail divided by 21 = 19 pieces + 1 extra = 20 pieces
and 400 feet of top rail, how
many pieces will be
needed if top rail comes
in 21-foot lengths?
A 19
B 17
C 20
D 22
The easiest joint to use is the C lap
___ joint.
A butt
B overlap
C lap
D none of the above
, If a fence section pulls C fence should be cut back and new posts installed next to the
loose from its anchor rod wall
in a block wall, the ___.
A rod should be cut and a
new one welded in place
B rod should be cut and
new rod drilled into the
wall
C fence should be cut
back and a new posts
installed next to the
wall
D none of the above
Sheet steel is cut with a ___ C a shear, power break
and bent into the desired
shape with ___.
A torch, pliers
B a shear, shaper
C a shear, power break
D none of the above
