SOLDERING PRACTICES MODULE 1 AND 2
TEST QUESTIONS WITH 100% CORRECT
ANSWERS.
1 of 37
Term
Hardware characteristics or conditions that do not conform to the
requirements of this specification are_.
Give this one a try later!
Either Software process indicators Either Firmware specifications or
or Software defects Firmware issues
Either Hardware process
Either Hardware enhancements or
indicators or Hardware
Hardware upgrades
, defects
Don't know?
2 of 37
Term
When N1A2P3 are found in brackets next to a "shall" statement
it indicates____.
Give this one a try later!
Required for Class 1, Optional Mandatory for Class 1,
for Class 2, Disregarded for Recommended for Class 2, Ignored
Class 3 for Class 3
No requirement has been
established for Class 1, Not applicable for Class 1,
Acceptable for Class 2, Necessary for Class 2, Standard for
Process Indicator for Class 3 Class 3
Don't know?
3 of 37
Term
One of the goals of the IPC training programs is to_____.
Give this one a try later!
, Teach advanced soldering Provide an understanding of
techniques. accept/reject criteria.
Explain electronic component Provide an overview of
design principles. manufacturing processes.
Don't know?
4 of 37
Term
Illumination at the surface of workstations should be at least____.
Give this one a try later!
500 lm/m² 2000 lm/m²
1000 lm/m² 1500 lm/m²
Don't know?
5 of 37
Term
A CIS may teach and certify______?
Give this one a try later!
TEST QUESTIONS WITH 100% CORRECT
ANSWERS.
1 of 37
Term
Hardware characteristics or conditions that do not conform to the
requirements of this specification are_.
Give this one a try later!
Either Software process indicators Either Firmware specifications or
or Software defects Firmware issues
Either Hardware process
Either Hardware enhancements or
indicators or Hardware
Hardware upgrades
, defects
Don't know?
2 of 37
Term
When N1A2P3 are found in brackets next to a "shall" statement
it indicates____.
Give this one a try later!
Required for Class 1, Optional Mandatory for Class 1,
for Class 2, Disregarded for Recommended for Class 2, Ignored
Class 3 for Class 3
No requirement has been
established for Class 1, Not applicable for Class 1,
Acceptable for Class 2, Necessary for Class 2, Standard for
Process Indicator for Class 3 Class 3
Don't know?
3 of 37
Term
One of the goals of the IPC training programs is to_____.
Give this one a try later!
, Teach advanced soldering Provide an understanding of
techniques. accept/reject criteria.
Explain electronic component Provide an overview of
design principles. manufacturing processes.
Don't know?
4 of 37
Term
Illumination at the surface of workstations should be at least____.
Give this one a try later!
500 lm/m² 2000 lm/m²
1000 lm/m² 1500 lm/m²
Don't know?
5 of 37
Term
A CIS may teach and certify______?
Give this one a try later!
