QUESTIONS AND SOLUTIONS MARKED A+
✔✔During a Class D Fire, which type of extinguisher will be used - ✔✔None, stand
clear and let it burn out
✔✔Which type of respirator is used in oxygen deficient spaces or where hazardous
gases are present? - ✔✔Supplied Air Respirator and Self Contained Breathing
Apparatus
✔✔Who is responsible for organizing and/or conducting workplace safety inspections to
identify violations? - ✔✔Safety Officer
✔✔What form must be used by manufacturers of chemical products to communicate to
the users, the chemical, physical, and hazardous properties of their products? -
✔✔Material safety data sheets
✔✔Who chairs the Safety Policy Committee at each command? - ✔✔Executive Officer
✔✔Who is authorized to certify a confined space for entry? - ✔✔Gas Free Engineer
✔✔Who is responsible for the safety of their personnel, develops safety plans, enforces
safety, and ensures PPE is available? - ✔✔Supervisor
✔✔Navy personnel must enter a hearing testing program when they work for an eight
hour period in a designated hazardous noise area that produces sound levels greater
than? - ✔✔84 dB
✔✔Which of the following lists of signs indicates that a person is suffering from heat
exhaustion? - ✔✔Ashen gray, cold, moist and clammy skin, and pupils dilated
✔✔When transporting a person with sucking chest wound, in what position should the
patient be placed? - ✔✔Lying, wound side down
✔✔All generators must be grounded to the earth a minimum of ____ ohms resistance or
comply with the National Electric Code when this cannot be reached? - ✔✔25 ohms
✔✔The abdominal thrust (Heimlich) maneuver is a treatment for what? - ✔✔Choking
✔✔Which type of bleeding is considered life threatening and is bright red in color? -
✔✔Arterial
, ✔✔A white phosphorus burn to the skin is complicated because the phosphorus
particles do what? - ✔✔Ignite upon contact with the air
✔✔Flush the are with a lot of cool water if the victim had a? - ✔✔Chemical burn to the
arm
✔✔The best method for removing ticks is to cost the with? - ✔✔Petroleum jelly, baking
powder paste and clear nail polish
✔✔HAZMAT containers must be placed a minimum of how many feet away from any
ignition device or source? - ✔✔50 feet
✔✔A mixture of unused or spoiled HAZMAT that are difficult to classify are known as -
✔✔Hazardous waste
✔✔How many categories of hazardous material are there? - ✔✔6
✔✔Who prepares reports for administrative purposes of the hazardous material
inventory? - ✔✔HICS
✔✔All consumable materials that are not project related are received at? - ✔✔Central
Shipping and Receiving (CSR)
✔✔Which of the following forms is used as a requisition and consumption reporting
document for procuring non-NSN material? - ✔✔NAVSUP 1250-2
✔✔Which of the following forms can be used as a requisition follow up, modifier, or
cancellation request? - ✔✔DD 1348
✔✔A listing of equipment and it's support material, which allows a unit to be self-
sufficient for an extended period of time, is found in the... - ✔✔COSAL
✔✔Minor property is described as property with a unit cost of ... - ✔✔$5,000 or more
and a useful life of less than 2 years
✔✔What lists all the repair parts installed in a piece of equipment or component to
which it applies? - ✔✔Allowable Parts List (APL)
✔✔A Report of Deficiency (SF-364), is used to - ✔✔Record Shipping or packaging
discrepancies
✔✔What is the frequency range of the AN/PRC 119? - ✔✔30-87.975 MHz