CWB Level 2 Closed Book | Questions with 100% Correct Answers | Updated & Verified

CWB Level 2 Closed Book | Questions with
100% Correct Answers | Updated & Verified




1. To measure the strength of a welded joint what mechanical test would you
X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5




prescribe?
X5




a) A transverse weld tension test.
X5 X5 X5 X5




b) A charpy test.
X5 X5




c) A CTOD test.
X5 X5




d) An all weld metal tension test.
X5 X5 X5 X5 X5




e) A side bend test.
X5 X5 X5




Ans: a) A transverse weld tension test.
X5 X5 X5 X5 X5 X5




2. Select the cutting process that would provide the narrowest heat affected
X5 X5 X5 X5 X5 X5 X5 X5 X5 X5




zone when cutting 12.5 mm (0.5 in) thick carbon steel.
X5 X5 X5 X5 X5 X5 X5 X5 X5 X5




a) Oxy-acetylene cutting. X5




b) Air-carbon arc cutting. X5 X5




c) Oxy-propane cutting. X5




1/
X5 X5



10

, d) Plasma arc cutting. X5 X5




e) Laser beam cutting X5 X5




Ans: e) Laser beam cutting
X5 X5 X5 X5




3. Which of the following refers to a welder test where a pipe assembly is
X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5




placed vertically and the joint welded in the horizontal position without rotat-
X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5 X5




ing the assembly?
X5 X5 X5




a) 1G
b) 2G
c) 3G
d) 5G
e) 6G
Ans: b) 2G X5 X5




4. Which of the following imperfections is normally considered as unaccept-
X5 X5 X5 X5 X5 X5 X5 X5 X5




able regardless of size or location?
X5 X5 X5 X5 X5 X5




a) Porosity.
b) Crack.
c) Inadequate penetration. X5




d) Lamination.
e) Burn-through.
Ans: b) Crack.
X5 X5




5. Select the correct penetrameter thickness for 2% sensitivity when radi-
X5 X5 X5 X5 X5 X5 X5 X5 X5




ographing a weldment 1.25 inches in thickness.
X5 X5 X5 X5 X5 X5 X5




a) 0.012 in. X5




b) 0.015 in. X5




2/
X5 X5



10