CORRECT ANSWERS
A technician would like to ensure that when users connect to a web server in a server farm, they
connect to the serer with the lowest CPU utilization. Which of the following technologies would
accomplish this?
A. Load balancing
B. High availability
C. Virtual machine
D. Reverse proxy - CORRECT ANSWERS Load Balancing
Changing the boot order of devices can be configured from which of the following?
A. DIP switches
B. BIOS
C. Chipset
D. Control Panel - CORRECT ANSWERS BIOS
What is an advantage of using non-ECC memory over ECC memory?
A. ECC is faster than non-ECC
B. Non-ECC is faster than ECC
C. Non-ECC is more expensive than ECC
D. Non-ECC checks for memory errors - CORRECT ANSWERS Non-ECC is faster than
ECC
,Before installing a new device, a technician checks to make sure the device is on the HCL. What
is an advantage of having an HCL device?
A. It is supported by other vendors
B. Increases performance
C. Decreases cost
D. Meets vendor standards - CORRECT ANSWERS Meets vendor standards
When building a computer with a 32-bit processor, what is the maximum amount of memory
supported?
A. 1GB
B. 2GB
C. 4GB
D. 8GB - CORRECT ANSWERS 4GB
A technician has installed an additional NIC on a server. Which of the following can now be
setup?
A: Teaming
B: VLANs
C: Port forwarding
D: Full duplex - CORRECT ANSWERS A: Teaming
,A technician is setting up a network and wants to automatically assign IP addresses. What needs
to be configured to do this?
A. WINS
B. DNS
C. DHCP
D. NTP - CORRECT ANSWERS DHCP
A technician is building a Windows 2008 server and has installed a motherboard, processor, and
power supply. Which of the following optical drives should they install?
A: Flash Drive
B: DVD-RW
C: CD-ROM
D: SSD - CORRECT ANSWERS B: DVD-RW
Typically, warranty information can be found on a vendor's website by looking up which of the
following?
A. Original hardware configuration
B. Service manual
C. Service tag
D. Model number - CORRECT ANSWERS C. Service tag
When purchasing a UPS for a server room, which of the following are important factors to
consider? (Select TWO).
, A. Network card configuration
B. Remote access procedures
C. Estimated runtime
D. Maximum load
E. Power cord length - CORRECT ANSWERS C. Estimated runtime
D. Maximum load
A new server must be configured to provide fault tolerant connectivity to the DMZ and the
backend database. What is the MOST cost-effective way to accomplish this?
A. A total of six NICs: two pairs of teamed NICs for the DMZ and two NICs for the backend
database.
B. One NIC can be configured with VLANs for the DMZ and backend database.
C. A total of eight NICs to be teamed with the appropriate VLANs configured for the DMZ and
backend database.
D. A total of four NICs: two NICs for the DMZ and two NICs for the backend database. -
CORRECT ANSWERS D. A total of four (4) NICs: two (2) for the DMZ and two (2) for
the backend database
Which TWO options are true about a caching name server?
A. They must have a trusted SSL certificate
B. They can be authoritative
C. They cannot be load-balanced