SUSPENSION & STEERING REVIEW CORRECT 100%

SUSPENSION & STEERING REVIEW
CORRECT 100%

Which of the following does not require a TPM warning system reset/relearn
procedure?

-Tire pressure adjustment
-Tire rotation
-Sensor replacement
-Tire replacement - ANSWERTire pressure adjustment

A - An incorrect wheel can affect tire clearance, or speedometer & odometer
calibrations.

B - The wrong size wheel can also affect the antilock brake system - ANSWERBoth

A - Load-carrying ball joits may have a small amount of play in them.

B - Follower ball joints should have some play in them. - ANSWERA

What component connects the steering gearbox to the steering linkage

- steering shaft
-idler arm
-tie rod
- pitman arm - ANSWERpitman arm

A - Parallelogram-type of steering linkage is mounted ahead of the fron
t suspension

B - Parallelogram-type of steering linkage is mounted behind the front suspension -
ANSWERBoth

_______________is the angle represented by the tilt of a wheel inward or outward
from the vertical as viewed from the front of the car. - ANSWERCamber



The simplest way to remove a ball joint is by heating the control arm near the ball
joint with an oxyacetylene torch,k then driving the ball joint out using a hammer and
brass drift - ANSWERFalse

A - Adaptive suspensions can alter ride height while the vehicle is in motion.

B - Active suspensions use air-operated actuators. - ANSWERA