Suspension and Steering Latest Exam Questions
and Answers 100% Correct
Bleeding a power steering unit is generally done by
turning the steering wheel left and right repeatedly
After rounding a turn, the front wheels do not return to the straight ahead position in a
normal way. What adjustment is most likely to be out of specifications?
Caster
"Toe" adjustment on front wheel drive vehicles is made by:
changing he length of the steering linkage
When performing a front-end alignment what should you do before you adjust the toe
setting?
adjust the caster & camber
Front-wheel toe-in adjustment on rear-wheel drive vehicles is made by:
changing the length of the steering linkage
A mechanic is going to adjust the curb height on a car with torsion bars. To do this the car
should be checked:
on a level surface with the car at curb weight
A proper way to check ball joints for wear is by:
visual observation of the wear indicator & unloading the ball joint and using a pry bar and a dial
indicator
, which of the following adjustments can be made on all vehicles with MacPherson strut
suspensions?
Toe settings
You are checking the war on ball joints with a dial indicator at the wheel rim. What must
you do to get accurate readings?
check the wheel bearing adjustment and correct if needed
A mechanic jacks up a car, stands facing it, places a hand on the front of each tire. The
mechanic pushes out and then pulls in on both tires. Too much movement would most
likely mean that:
the tie rod ends are worn
Which of the following should be checked first thing when doing a front-end alignment?
Curb height
To counteract road crown, most manufacturers recommend that the left front wheel be
adjusted to have:
Less positive (+) caster than the right
If the toe-in is too great, the tread will most likely show:
feathered edges on both front tires
When a wheel alignment is done on a car with front torsion bars, what should be checked
and adjusted first?
Curb height
and Answers 100% Correct
Bleeding a power steering unit is generally done by
turning the steering wheel left and right repeatedly
After rounding a turn, the front wheels do not return to the straight ahead position in a
normal way. What adjustment is most likely to be out of specifications?
Caster
"Toe" adjustment on front wheel drive vehicles is made by:
changing he length of the steering linkage
When performing a front-end alignment what should you do before you adjust the toe
setting?
adjust the caster & camber
Front-wheel toe-in adjustment on rear-wheel drive vehicles is made by:
changing the length of the steering linkage
A mechanic is going to adjust the curb height on a car with torsion bars. To do this the car
should be checked:
on a level surface with the car at curb weight
A proper way to check ball joints for wear is by:
visual observation of the wear indicator & unloading the ball joint and using a pry bar and a dial
indicator
, which of the following adjustments can be made on all vehicles with MacPherson strut
suspensions?
Toe settings
You are checking the war on ball joints with a dial indicator at the wheel rim. What must
you do to get accurate readings?
check the wheel bearing adjustment and correct if needed
A mechanic jacks up a car, stands facing it, places a hand on the front of each tire. The
mechanic pushes out and then pulls in on both tires. Too much movement would most
likely mean that:
the tie rod ends are worn
Which of the following should be checked first thing when doing a front-end alignment?
Curb height
To counteract road crown, most manufacturers recommend that the left front wheel be
adjusted to have:
Less positive (+) caster than the right
If the toe-in is too great, the tread will most likely show:
feathered edges on both front tires
When a wheel alignment is done on a car with front torsion bars, what should be checked
and adjusted first?
Curb height
