ELECTRICAL JOB INFORMATION STUDY
GUIDE TEST 2025/26 QUESTIONS WITH
100% CORRECT ANSWERS.
1 of 29
Term
what kind of receptacles that work on 1/40 of a second?
Give this one a try later!
ground fault center inception general faradic current interruptor
ground fault circuit interruptor ground fault current inception
Don't know?
, 2 of 29
Term
Cable ties and cable trays should be __ for the application.
Give this one a try later!
UV listing for where it
is installed Fireproof certification for safety
Temperature rating for
extreme climates Waterproof rating for outdoor use
Don't know?
3 of 29
Term
Can you wear jewelry at the job site?
Give this one a try later!
14 and 18 less resistance
MC no
Don't know?
, 4 of 29
Term
What is the real name of Romex?
Give this one a try later!
NM-B cable MC
Lay down/strap it Nylon
Don't know?
5 of 29
Definition
Many details must be considered to install the wire successfully
without causing damage to the conductors. These details include
proper conduit installation design to ensure that the conductors do
not exceed the maximum allowable sidewall pressure, minimum
bending radius, maximum allowable pulling tension, clearance, and
jamming probability.
Give this one a try later!
Cable calculations should When planning a wire pull,
be calculated when? you need to know
what?
GUIDE TEST 2025/26 QUESTIONS WITH
100% CORRECT ANSWERS.
1 of 29
Term
what kind of receptacles that work on 1/40 of a second?
Give this one a try later!
ground fault center inception general faradic current interruptor
ground fault circuit interruptor ground fault current inception
Don't know?
, 2 of 29
Term
Cable ties and cable trays should be __ for the application.
Give this one a try later!
UV listing for where it
is installed Fireproof certification for safety
Temperature rating for
extreme climates Waterproof rating for outdoor use
Don't know?
3 of 29
Term
Can you wear jewelry at the job site?
Give this one a try later!
14 and 18 less resistance
MC no
Don't know?
, 4 of 29
Term
What is the real name of Romex?
Give this one a try later!
NM-B cable MC
Lay down/strap it Nylon
Don't know?
5 of 29
Definition
Many details must be considered to install the wire successfully
without causing damage to the conductors. These details include
proper conduit installation design to ensure that the conductors do
not exceed the maximum allowable sidewall pressure, minimum
bending radius, maximum allowable pulling tension, clearance, and
jamming probability.
Give this one a try later!
Cable calculations should When planning a wire pull,
be calculated when? you need to know
what?
