1 | Page
Applications of ESQD Principles Questions
and Correct Answers
Which four of these locations may be considered a
potential explosion site? Ans: operating building, AGM,
ECM, aircraft parking
Which three statements about interchange yards are
correct? Ans: exchanging railcars, visual inspections,
removing documents
7-Bar, 3-Bar, and Undefined relate to Ans: ability of a
magazine's headwall to withstand an exterior explosion.
Which table is used for HD 1.1 ILD from an ECM but only
when the ECM is the PES? Ans: table 8-8
This process is designed to protect against explosion
communication between adjacent bays or buildings, from
death or serious injury caused by incidents in adjacent
bays or buildings, and from damage to vital and expensive
equipment installations. What is this process called? Ans:
reinforced safety construction?
Two tables are used to determine either the required
separation distance or explosive limits for ammunition
magazines. What are they? Ans: HD 1.1 guide, Table 8-10
HD 1.2.1 and HD 1.2.2 NEW are different how? Ans: 1.2.1 is
160lbs or more
Which three items describe Maximum Credible Event
(MCE)? Ans: NEW of three packages, never assigned 1.2.2,
fixed value
The table that you always begin with when solving HD 1.2
ESQD problems is Ans: Table 8-19
© 2025 All rights reserved
Applications of ESQD Principles Questions
and Correct Answers
Which four of these locations may be considered a
potential explosion site? Ans: operating building, AGM,
ECM, aircraft parking
Which three statements about interchange yards are
correct? Ans: exchanging railcars, visual inspections,
removing documents
7-Bar, 3-Bar, and Undefined relate to Ans: ability of a
magazine's headwall to withstand an exterior explosion.
Which table is used for HD 1.1 ILD from an ECM but only
when the ECM is the PES? Ans: table 8-8
This process is designed to protect against explosion
communication between adjacent bays or buildings, from
death or serious injury caused by incidents in adjacent
bays or buildings, and from damage to vital and expensive
equipment installations. What is this process called? Ans:
reinforced safety construction?
Two tables are used to determine either the required
separation distance or explosive limits for ammunition
magazines. What are they? Ans: HD 1.1 guide, Table 8-10
HD 1.2.1 and HD 1.2.2 NEW are different how? Ans: 1.2.1 is
160lbs or more
Which three items describe Maximum Credible Event
(MCE)? Ans: NEW of three packages, never assigned 1.2.2,
fixed value
The table that you always begin with when solving HD 1.2
ESQD problems is Ans: Table 8-19
© 2025 All rights reserved
