Texas CDL seCTion 1, 2 & 3 exam ||
2025 UpDaTe QUesTions wiTh CompLeTe
answers | aLreaDy GraDeD a+ |
GUaranTeeD pass!!
1. What is a pull-up? - ANSWER ✔ When you pull forward to postion
your vehicle after backing up.
2. If stopped on a hill, how can you start moving without rolling back? -
ANSWER ✔ Partly engage the clutch before you take your right foot
off the brake. Put on the parking brake whenever necessary to keep
from rolling back.
3. When backing, why is it important to have a helper? - ANSWER ✔
There are blind spots the driver can't see.
4. What is the most important hand signal that you and the helper should
agree on? - ANSWER ✔ Stop.
5. What are the 2 special conditions where you should downshift? -
ANSWER ✔ Before starting down a hill, and before entering a curve.
, 6. When should you down shift automatic transmission? - ANSWER ✔
When going down grades.
7. What are some things you should check on the front of the vehicle
during your inspection? - ANSWER ✔ Condition of front axle,
condition of steering system, the windshield, lights and reflectors and
turn signals.
8. What should wheel bearing seals be checked for? - ANSWER ✔
Should be checked for leaks.
9. How many red reflectors should you carry? - ANSWER ✔ 3
10. How do you test hydraulic brakes for leaks? - ANSWER ✔ Pump
the brake pedal 3 times, then apply firm pressure to the pedal and
hold for 5 seconds. The pedal should not move, but if it does then you
have a leak.
11. When should drivers of trucks and truck tractors transporting cargo
inspect the securement of their cargo? - ANSWER ✔ within the first
25 miles of a trip and every 150 miles or every 3 hours afterwards.
2025 UpDaTe QUesTions wiTh CompLeTe
answers | aLreaDy GraDeD a+ |
GUaranTeeD pass!!
1. What is a pull-up? - ANSWER ✔ When you pull forward to postion
your vehicle after backing up.
2. If stopped on a hill, how can you start moving without rolling back? -
ANSWER ✔ Partly engage the clutch before you take your right foot
off the brake. Put on the parking brake whenever necessary to keep
from rolling back.
3. When backing, why is it important to have a helper? - ANSWER ✔
There are blind spots the driver can't see.
4. What is the most important hand signal that you and the helper should
agree on? - ANSWER ✔ Stop.
5. What are the 2 special conditions where you should downshift? -
ANSWER ✔ Before starting down a hill, and before entering a curve.
, 6. When should you down shift automatic transmission? - ANSWER ✔
When going down grades.
7. What are some things you should check on the front of the vehicle
during your inspection? - ANSWER ✔ Condition of front axle,
condition of steering system, the windshield, lights and reflectors and
turn signals.
8. What should wheel bearing seals be checked for? - ANSWER ✔
Should be checked for leaks.
9. How many red reflectors should you carry? - ANSWER ✔ 3
10. How do you test hydraulic brakes for leaks? - ANSWER ✔ Pump
the brake pedal 3 times, then apply firm pressure to the pedal and
hold for 5 seconds. The pedal should not move, but if it does then you
have a leak.
11. When should drivers of trucks and truck tractors transporting cargo
inspect the securement of their cargo? - ANSWER ✔ within the first
25 miles of a trip and every 150 miles or every 3 hours afterwards.
