Air Assault School, Phase I | Actual
Exam Questions With Verified Solutions
What is the allowable cargo load of the LUH-72A in its normal configuration when
used for MEDEVAC operations? - correct-answer -2 litter, 1 medic, or 5
ambulatory.
What is the primary use for the CH-47 when used during CASEVAC missions? -
correct-answer -Mass Casualty Evacuation.
What is the crew of a LUH- 72A when not being used for MEDEVAC operations? -
correct-answer -(3)Pilot, Co Pilot, and Crew Chief
What is the total length of the high performance utility hoist? - correct-answer -
256ft.
When used for CASEVAC operations, what is the (ACL) for the CH-47? - correct-
answer -31 ambulatory or 24 litter and 1 ambulatory.
,2|Page
If the obstacle on the approach route is eight meters tall and the obstacle on the
departure route is ten meters tall of your PZ/LZ, what is the unusable space for
the departure route? - correct-answer -100m.
What reference material covers LZ/PZ operations? - correct-answer -FM 3-21.38.
What are the dimensions of the reference lights that mark an additional
touchdown point for cargo aircraft? - correct-answer -10mx10m.
What is the first step in HLZ setup (LZ/PZ Operations)? - correct-answer -Establish
control facilities.
What size landing point is required for a CH-47 with a long line sling load during
nighttime operations? - correct-answer -Size 7
Why must your sleeves be rolled down when working around aircraft? - correct-
answer -Protect from flying debris & flash fires
, 3|Page
What reference material covers Aircraft Safety? - correct-answer -FM 3-99
In the acronym DROP, what does the R stand for? - correct-answer -Reduce
Unnecessary Gear
What are the three portions of the aircraft that you must avoid at all times? -
correct-answer -Main rotor blade, tail rotor blade, and cargo hook (static
electricity).
In case of a fire, when should you exit the aircraft? - correct-answer -Immediately.
True or False? All A/C can land if the ground slope is between 8 and 15 degrees. -
correct-answer -False.
True or False? Establish Control facilities is the third step when establishing a HLZ?
- correct-answer -False.